Where can I find a laser mount for a tiny rail?

Shaftway · October 15, 2012, 05:47 AM

I picked up one of those tiny derringers for the hell of it, but now I'm curious what kind of accuracy I can actually get out of this, so I'd like to mount a laser sight to it. Or maybe a scope. But that'd be just for laughs, followed by jaw drops at the range. It's double barreled, chambered in .22LR, but I plan on buying a .25 or .32 barrel for it.

Here's the gun: http://www.cobrapistols.net/product-...derringers.asp

So there's a rib running along the top. I measure it at about 5/32" wide (I don't have my calipers to check the narrow parts). A laser sight that clamps on this would be ideal.

My other option is to get a laser bore sight. That'd require one of the other sizes, and use up one of my barrels, so that's more of a plan B.

Any other ideas, or anyone know where I can find a laser sight that'll clamp on that tight?

Double Naught Spy · October 15, 2012, 08:18 AM

You could try a 3/8" mount, though the rib is 1/32" smaller. You might have to remove a bit of material from the mount so that it will close more tightly and hence be able to grip the 5/32" rail, likely AFTER you remove some metal for the mount to grip the rib/rail, or from the mount, as I doubt you will find a mount that will just fit the cutouts only.

WESHOOT2 · October 16, 2012, 11:29 PM

Call Brownells.
On the phone; ask for tech help.

October 15, 2012, 05:47 AM	#1
Shaftway Junior Member Join Date: June 11, 2009 Posts: 3	Where can I find a laser mount for a tiny rail? I picked up one of those tiny derringers for the hell of it, but now I'm curious what kind of accuracy I can actually get out of this, so I'd like to mount a laser sight to it. Or maybe a scope. But that'd be just for laughs, followed by jaw drops at the range. It's double barreled, chambered in .22LR, but I plan on buying a .25 or .32 barrel for it. Here's the gun: http://www.cobrapistols.net/product-...derringers.asp So there's a rib running along the top. I measure it at about 5/32" wide (I don't have my calipers to check the narrow parts). A laser sight that clamps on this would be ideal. My other option is to get a laser bore sight. That'd require one of the other sizes, and use up one of my barrels, so that's more of a plan B. Any other ideas, or anyone know where I can find a laser sight that'll clamp on that tight?

October 15, 2012, 08:18 AM	#2
Double Naught Spy Senior Member Join Date: January 8, 2001 Location: Forestburg, Montague County, Texas Posts: 9,729	You could try a 3/8" mount, though the rib is 1/32" smaller. You might have to remove a bit of material from the mount so that it will close more tightly and hence be able to grip the 5/32" rail, likely AFTER you remove some metal for the mount to grip the rib/rail, or from the mount, as I doubt you will find a mount that will just fit the cutouts only. __________________ "If you look through your scope and see your shoe, aim higher." -- said to me by my 11 year old daughter before going out for hogs 8/13/2011

October 16, 2012, 11:29 PM	#3
WESHOOT2 Senior Member Join Date: February 20, 1999 Location: home on the range; Vermont (Caspian country) Posts: 12,910	Call Brownells. On the phone; ask for tech help. __________________ . "all my ammo is mostly retired factory ammo"