The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old October 20, 2009, 10:43 PM   #1
onemelo1
Junior Member
 
Join Date: October 20, 2009
Posts: 7
help Identifying an old spanish single shot shotgun

I believe it is an Aramberri Hermanos but am not 100% sure. Ok It is aside action single shot serial # 51659 and another serial #34. It has intricate scroll work one side with what looks to be a boar and dog with other intricate scrolling and the other a red stag and dog with other intricate scrolling and underneath a duck in flight with a stamp of CC with a circle (makers mark) it also has a stamp of a 2 with dashes around it and a larger oval stamp with 12-75 in it. it also has a customs mark of a shield with an x in the middle with something else on top, There is also aother stamp which I can not make out. Also when you remove the barrel there is another serial # 34 inside the receiver. The forend has a push button front to remove with a #34 on that and then the Barrell has all the same stamps and serial #'s as listed above and also gives choke info. The Barrel also has some intricate scroll work where it meets up to the receiver. The gun is beautiful I believe it has Nickel receiver with a blued barrell. Unsure of what wood the stock is made but has a real fancy butt plate as well looks like weaving on it. Any help to confirm what kind of shotgun this is and value would be appreciated
Attached Images
File Type: jpg DSCF0871.jpg (255.7 KB, 158 views)
File Type: jpg DSCF0872.jpg (279.3 KB, 95 views)
File Type: jpg DSCF0875.jpg (257.0 KB, 83 views)
onemelo1 is offline  
Old October 20, 2009, 10:45 PM   #2
onemelo1
Junior Member
 
Join Date: October 20, 2009
Posts: 7
here are some more pics

some more pics to follow
Attached Images
File Type: jpg DSCF0876.jpg (259.3 KB, 84 views)
File Type: jpg DSCF0877.jpg (254.1 KB, 58 views)
File Type: jpg DSCF0878.jpg (251.0 KB, 57 views)
onemelo1 is offline  
Old October 20, 2009, 10:47 PM   #3
onemelo1
Junior Member
 
Join Date: October 20, 2009
Posts: 7
more pics

just one more pic after these
Attached Images
File Type: jpg DSCF0879.jpg (265.2 KB, 59 views)
File Type: jpg DSCF0880.jpg (247.3 KB, 53 views)
File Type: jpg DSCF0883.jpg (243.6 KB, 50 views)
onemelo1 is offline  
Old October 20, 2009, 10:48 PM   #4
onemelo1
Junior Member
 
Join Date: October 20, 2009
Posts: 7
last picture

i hope these help
Attached Images
File Type: jpg DSCF0885.jpg (245.2 KB, 72 views)
onemelo1 is offline  
Old August 18, 2012, 08:04 PM   #5
jkeefer034
Junior Member
 
Join Date: August 18, 2012
Posts: 1
Spanish Single Barrel Shotgun

I have the same exact gun and was wondering if you ever found any information on it. thanks
jkeefer034 is offline  
Old October 10, 2012, 09:08 AM   #6
RA1963
Junior Member
 
Join Date: October 10, 2012
Posts: 1
Aramberri Hermanos S.R.C. Spanish shotgun

I have the same shotgun it is a 16 guage and is very light and a great bird gun for grouse,quail and pheasant. Spanish made gun circa. 1967. These guns are very nice and well balanced and this shotgun fits me very well. Antonio Aramberri was a gun maker mostly shotguns from Eibar Spain, the company produced shotguns as a subcontractor (Parts) for companies such as AYA for example. The gun making capital of Spain, Eibar located in Northern Spain is known world wide for producing fine hunting guns. This particular shotgun was was imported to the USA in the late 1960's (1967-and on) to early 1970's. The stock seems to be made of walnut and has that slender European stock and grip. The trigger and trigger guard, Hammer and parts of the forward hand guard assembly are made of blued or patina finished aluminum alloy. If anyone can contribute anymore information it would be geat. Nice shotgun!!!!!
RA1963 is offline  
Old August 23, 2013, 05:27 PM   #7
xerxes66
Junior Member
 
Join Date: May 29, 2013
Posts: 2
spanish shotgun parts

I have the same shotgun as is pictured in these pictures. Mine has a broken shell ejector and I am looking for a parts gun or parts. Mine is a 12 guage single barrel. Does anyone have a parts gun or parts for sale?

xerxes66
gr8wood@hotmail.com
xerxes66 is offline  
Old August 23, 2013, 06:45 PM   #8
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
.

onemelo1 -

FWIW, your was made by ARAMBERRI HERMANOS (C. C. = maker's mark)

That bbl is chambered for the 3" Mag (12-75 = chambering/proofmark)

It was made in 1964 (J1 = Spanish Date Code).




.
PetahW is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10069 seconds with 10 queries