The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 3, 2012, 06:22 PM   #1
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,602
Love my P01, but these darn mags!

Every CZ I've bought the past ten years has been delivered with mags that just don't work. The springs are like wet noodles. People say, "Mec Gar makes the factory mags" which I highly doubt as the springs are physically different in appearance.

I made up a bunch of LRN for my P01. They worked great with the 16rd MecGar, but one jam per mag with the factory 14rd. I have two on order but this mandatory mag buy is getting old.
chris in va is offline  
Old October 3, 2012, 06:27 PM   #2
comn-cents
Senior Member
 
Join Date: June 18, 2008
Location: Pac.N.W.
Posts: 1,804
It sucks that they don't work, I've had a few like that. I just buy wolf springs.


http://www.gunsprings.com/Semi-Auto%...D1/mID16/dID91
__________________
Be Smarter Than A Bore-Snake!
comn-cents is offline  
Old October 3, 2012, 08:11 PM   #3
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,206
Never had the problem with any of my CZ factory mags.
CZ 40B, 75 BD Police and Kadet Conversion Kit. All continue to work as they should.
I'm sorry you seem to get the bad ones.
__________________
NRA Chief Range Safety Officer, Home Firearm Safety and Pistol Instructor
"There are three classes of people: those who see, those who see when they are shown, those who do not see."
Leonardo da Vinci
CowTowner is offline  
Old October 3, 2012, 11:33 PM   #4
armoredman
Senior Member
 
Join Date: May 22, 2007
Location: Arizona
Posts: 3,838
This is my experience, too, never had an issue with a factory CZ mag. I sold my extra Compact mags a while ago, or I'd send you one just to get you a good one!
__________________
http://czfirearms.us/ same original CZForum, new location.
armoredman is offline  
Old October 4, 2012, 10:41 AM   #5
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,602
You'd think Wolff springs would help, but they are only 10% stronger than stock. I tried them with the factory 15rd with my 75bd but still got feeding issues.
chris in va is offline  
Old October 4, 2012, 11:55 AM   #6
Zhillsauditor
Senior Member
 
Join Date: October 19, 2008
Posts: 635
Strange, I've owned four CZs and never had a magazine problem with any of them. My P01 shoots with the factory mags, with my two mecgar mags, as well as the 16 rounders from the CZ 75bd I had, even if they stuck out a bit. I've not heard of this being an issue with CZs, but if wolff makes extra power springs, it must be.
Zhillsauditor is offline  
Old October 4, 2012, 12:48 PM   #7
Pilot
Senior Member
 
Join Date: December 21, 2000
Posts: 3,692
I also change out my mag springs with Wolff. No problems.
__________________
Pilot
Pilot is offline  
Old October 4, 2012, 02:34 PM   #8
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 3,274
Chris,
I"ve got that funny "Hmm" thing going on. How many clips have you bought in the past 10 years that have been bad? All, or the majority? That's just really got my curiosity going.

Do you suppose you're doing anything different in your cleaning or lubing processes that the rest of us aren't? I can't help but wonder if there's some other underlying cause.

Do you use a heavy grease anywhere on the firearm? Do you keep the inside of the magwells wet with oil or grease? What kind and how much lube do you use?

Most CZ's I've personally handled seemed to be the least effected handguns by limpwristing I know of- right up there with Sig 220's.

There just almost HAS to be something else going on, unless somebody at CZ just doesn't like you for some old 10+ year transgression.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I'm going to use the words "clip" and "Long Colt" every chance I get. It grinds my gears to see new members attacked when we all know dang good and well what's being refered to.
10-96 is offline  
Old October 4, 2012, 02:52 PM   #9
Mark In Texas
Member
 
Join Date: October 12, 2011
Posts: 42
Two CZs here and never had a problem with magazines with either, factory 10, 14, and 15 round mags as well as some Mecgars.
Mark In Texas is offline  
Old October 4, 2012, 04:15 PM   #10
testuser
Senior Member
 
Join Date: September 8, 2010
Posts: 495
I've owned four CZ pistols and one rifle, no problem with any mags, either. I'd call the company, or purchase a few extra mec-gar mags.

It could also be that your CZ just doesn't like that particular load. Mine seems to prefer shorter reloads for some bullet profiles.
testuser is offline  
Old October 6, 2012, 11:15 AM   #11
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,602
Alrighty, got my MecGars today.

Factory mag spring measures .045" thick and is uniform in width throughout it's length. MecGar measures .051" and is mag width for 3/4 of the length up to the 'pinch' in the mag body. Spring feels much stronger, definitely more than the 10% Wolff spring I had years ago.

Look, my first CZ was a 75bd. It would try to extract factory FMJ while feeding a fresh round and jam on the case rim. CZ couldn't fix it, so I got some MecGars and it cleared up.

My 527 had the rounds feeding at a 45 degree angle. Turns out the mag body had burrs from an improperly designed cut. CZ sent me two new mags with the same burr and refused to listen to my fix. The follower isn't anti-tilt, adding to the issue.

I just accept that every new CZ I buy will need 'tweaks'. No biggie, love the guns.

Last edited by chris in va; October 6, 2012 at 11:25 AM.
chris in va is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09091 seconds with 9 queries