The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 22, 2001, 04:39 AM   #1
a-bolt
Member
 
Join Date: July 11, 2000
Location: Los Angeles, CA, USA
Posts: 61
9mm bullet seated in a .38 case?
My sierra manual mentioned a cowboy action configuration which uses a 124gr 9mm (auto) LRN bullet seated in a .38 spcl case. Is that crazy or can the be done? I did not think you could mix auto bullets and revolver ones since they have slight differences.

What gives?

__________________
Qui tacit consentire.
Who is silent is understood to give consent. i.e. Don't sit by while people slowly take your rights. Stand up and get involved! Check out my website: www.geocities.com/abolt3006/
a-bolt is offline  
Old March 22, 2001, 05:12 AM   #2
johnnybravo
Senior Member
 
Join Date: February 10, 2000
Posts: 100
Some commercial brands of cast 9mm bullets are sized .357. These would work in the 38 spl casing.

FWIW, I cast my own bullets. I use the same bullet, sized .357 for both the 9mm and 38/357.

If you use an auto bullet in a revolver case, it won't have a crimp groove. You would then crimp it at the very front of the top driving band.
__________________
johnnyb
A slow hit beats a fast miss.
johnnybravo is offline  
Old March 22, 2001, 09:31 AM   #3
dick w. holliday
Senior Member
 
Join Date: January 13, 2001
Location: NC
Posts: 589
i also cast my own and the only bullet i shoot in my 9mm/38super/38spec/357mag is a lee 125 gr tumble lubed bullet which is unsized. i shoot thiese bullets in 3gun/action pistol/cowboy. you'll notice i didn't mention any bullseye shooting- i guess if i did i'd spend more time on these bullets-but for what i call "Hose and go shooting" these rounds are the ticket for me....Good shooting...Dick
dick w. holliday is offline  
Old March 22, 2001, 02:15 PM   #4
tooltime
Member
 
Join Date: February 12, 2001
Location: Huntsville, Al
Posts: 17
9mm bullets in .38's

For all of you Colt owners. Slug your bores. Especially in Detective Specials, Official Police, Police Positive Specials. You will find bores ranging from .354 - .356. A 160 grain .38 Super bullet sized to .355 works great and is more accurate than .357 dia bullets. Give it a try you will be suprised. Tooltime
tooltime is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06429 seconds with 9 queries