The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old September 20, 2012, 02:59 PM   #1
Jack O'Conner
Senior Member
 
Join Date: July 11, 2005
Location: Lancaster County, Pennsylvania
Posts: 1,484
Range Report: 45 caliber TC Hawkin rifle

It was very breezy which made it difficult to keep my pan powder in place so I fired only two shots. Very light recoil. I'll wait for a better weather day to develop a hunting load using conical bullet. Any suggestions?
Distance: 35 yards

Load: 50 grs of FFFg with .440 round ball w/lubed patch

Jack



__________________
Fire up the grill! Deer hunting IS NOT catch and release.

Last edited by Jack O'Conner; September 20, 2012 at 03:34 PM.
Jack O'Conner is offline  
Old September 20, 2012, 08:14 PM   #2
kwhi43@kc.rr.com
Senior Member
 
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,186
Yes, you willl love your T/C Hawken. I built mine in 1973 from a T/C kit. It is a 45 also. At the time mine was new for 125.00. Boy they sure do shoot!

kwhi43@kc.rr.com is offline  
Old September 21, 2012, 06:06 PM   #3
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
My .45 T/C only looks like a Hawken, but it's 13/16" (across-the-flats) barrel instead of the Hawken's 15/16" barrel ID's it as an early unmarked Seneca.



The thinner barrel makes for a lighter rifle, but it also won't takes loads as hefty as a heavier Hawken. (and neither will my shoulder)

I checked it's zero last week, with T/C Maxi-Hunter pre-lubed conicals over 70gr of FFFg Holy Black, and it easily put 3 shots in a 50yd group about 2x as large as the OP's RB group - about as far as I expect to see a Whitetail, where I usually hunt.


.
PetahW is offline  
Old September 21, 2012, 09:54 PM   #4
B.L.E.
Senior Member
 
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 1,905
My experience with Maxi-balls in a TC is that accuracy is so-so until you reach maximun loads, then they will shoot cloverleafs at 50 yards and two inch groups at 100. You got to have enough pressure to expand those bullets into the rifling.

45-50 grains 3fg seems to be the sweet spot for patched round balls in those .45 caliber 48 inch twist barrels in my experience.
B.L.E. is offline  
Old September 22, 2012, 08:22 AM   #5
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
Two shots isn't much of a report.
35 yards tells almost nothing about performance or accuracy. You need at least 50 yards.
Funny, 40+ years of flintlock shooting the wind has never hindered me from priming.
But, if you enjoyed, that is good.
Rifleman1776 is offline  
Old September 22, 2012, 12:42 PM   #6
B.L.E.
Senior Member
 
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 1,905
I think that 35 yards will definitely show you if a load is in-accurate. If using longer ranges to asses your rifle's accuracy, keep in mind that a mere 5 mph cross wind will drift a .45 roundball about 1 1/2 inches at 50 yards and over 6 inches at 100 yards. Also watch changing light conditions. Bright sun to overcast will change iron sight's zero.
B.L.E. is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06890 seconds with 9 queries