The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Thread Tools Search this Thread
Old September 3, 2012, 04:38 PM   #1
Join Date: March 3, 2011
Posts: 54
Weaver ring height for TC Omega

I have an old 1.75X5 Redfield Widefield I'd like to mount on a TC Omega.

Any suggestions about Weaver ring height to clear/cock the hammer? The objective is only about 1.25" so that end should not be a problem.

I already have the Weaver base and don't have much time until ML season starts so need something I can buy locally. Thanks.
mag1911 is offline  
Old September 4, 2012, 09:46 AM   #2
Sure Shot Mc Gee
Senior Member
Join Date: January 2, 2012
Posts: 2,453
Being the Omega has a small profile hammer. I would think High rings would work well for your application or you could call Thompson Center and ask for their advice 1-603-332-2333. It's an older number I have given you but it may still work. Otherwise probably has a current listing. T/Cs zip is 03866 there location is Rochester, New Hampshire. Good luck in your up and coming M/L Season also.
"Do not follow where the path leads, rather go where there is no path and leave a trail."
Sure Shot Mc Gee is offline  
Old September 5, 2012, 05:10 AM   #3
Join Date: March 3, 2011
Posts: 54
Thanks for the suggestion. I'll be looking for a set of high rings.
mag1911 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04650 seconds with 9 queries