The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old July 7, 2012, 05:13 PM   #1
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
Mauser 24/47 Shooting Demonstration

I really enjoy my 24/47 Mauser. It is one sweet rifle. Here's a video.

http://www.youtube.com/watch?v=GLU5OTWi37U
Amsdorf is offline  
Old July 8, 2012, 09:25 AM   #2
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,182
I picked up one of these from Samco a few years ago. It was covered in cosmoline. Once I cleaned all the cosmo off, I found the gun was practically new. The stock was even in excellent condition. Using the original Yugo surplus ammo, I got 3" groups. These rifles are still selling for around $250 give of take a few. They are bargains.
chiefr is offline  
Old July 8, 2012, 09:54 AM   #3
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
I agree, I suggest a 24/47 to people who want a Mauser style rifle.
Amsdorf is offline  
Old July 8, 2012, 05:19 PM   #4
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
Amsdorf.

I bought one of these from Samco Global, and it was like brand new when I got it. Mine has the bent down bolt handle like the M48 and is very accurate with my handloads.
I can hit a Milk jug at 200 yards with it, a young man with good eye sight could probably take it out farther than that.
Good Rifles, and another good video.

I form my cases from used 30 06 brass and load fairly light, mild recoil, less muzzle blast, long case life, and very good accuracy.
TX Hunter is offline  
Old July 9, 2012, 08:47 AM   #5
wpsdlrg
Senior Member
 
Join Date: August 18, 2009
Posts: 452
I have an M48, which I bought from a friend of a friend for $90, about 8- 10 years ago. It has become my only rifle, as I love it so much. I shot it in the standard configuration for years, all the while experimenting with such things as improved iron sights and glass-bedding the action in the stock, as well as hand loading for it. The barrel was somewhat pitted when I got it, but it shot well with my hand loads (but was finicky).

A few years ago I re-barreled the rifle myself, using only hand tools, a large bench vise and homemade action wrench.....and a pristine Yugo "takeoff" barrel I got from Numrich for $34. The re-barrel wasn't really that difficult. I have since cut and crowned the barrel at 17.5".....and bedded the action into a cut down ("sportered") 24/47 walnut stock, from the 1930's. I reconfigured the stock to look like a pre-war Mauser sporter, complete with schnabel fore end.

The finished carbine shoots 1.5" 100 yard groups, with cast paper-patched bullets (a hobby all to itself I took up to get a cast load which had enough oompf for hunting deer). With 175 grain Sierra soft-points and 39.5 grains of Hodgdon Benchmark, it will produce cloverleaf groups at 100 yards, with iron sights. ( I switched back from a scope to irons recently, after getting a proper eyeglass prescription which allowed this.)

I also load on the light side, approximately equivalent to 30/30 specs. This amounts to around 2100 fps with my cast PP loads and the Sierras. This has proved to be plenty for whitetails....and gives me stellar brass life (sometimes more than 20 firings). I also make most of my brass from 30/06 or 270 Win., due to the cost and availability of 8 x 57 brass.

I got rid of all of my other rifles years ago, in favor of the M48. It has everything I ever wanted: accuracy, extreme reliability, interesting history, etc. I get quizzical expressions and enthusiastic questions, almost every time I take it to the range (I guess that's MY 15 minutes of fame). With it, I've also become the local "paper-patching guru" (more questions), which is fun.

Last edited by wpsdlrg; July 9, 2012 at 08:52 AM.
wpsdlrg is offline  
Old July 9, 2012, 06:49 PM   #6
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,855
Bought my son one from SOG for Xmas...

Stretched it's legs for the first time yesterday at long-range. First 565 yards, and then at 1,000 yards. Standard milsurp ammo.

Amazingly enough (to us), the factory irons are graduated dead-on. On the 600 yard setting, he nailed the center of a truck tire at 565 yards, first shot.

At 1000, we couldn't actually see the target (a 10" gong), but could barely make out the posts on either side where it was suspended. Every shot hit within five or six feet of the target. Pretty damn impressive, for the volley-fire that it was intended to do at that range. Kicks like a mule, but fun to shoot, and damned accurate. Thinking about picking up another, and scoping (an maybe a re-barrel) for a project.
tobnpr is offline  
Old July 9, 2012, 07:14 PM   #7
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
Wow, that is amazing. And kudos, Dad, for spending this kind of quality time with your son. You have no idea what kind of investment you are making in your son's future and memories.

God bless you, sir.
Amsdorf is offline  
Old July 9, 2012, 10:04 PM   #8
wpsdlrg
Senior Member
 
Join Date: August 18, 2009
Posts: 452
The Yugo rifles, M48 and 24/47 have always been rather looked down upon by the "authentic German K98k" crowd. But, the fact is, the Yugo rifles often are just as good, where it counts. As regards fit and finish, they may have a point (at least, in comparison to early WW2 and pre-WW2 K98k's - but not really to the late-war rifles). There are some early production Yugo rifles that exhibit odd characteristics, such as "stiff-bolt syndrome"....with hot loads. The majority, however, are good solid battle rifles, that do the job just as well as any other variant of the Mauser 98.

With prices of the "authentic" Mausers climbing all the time....and the scarcity of good examples that haven't been used up....the Yugo rifles are very attractive indeed. That's what got me into them.
wpsdlrg is offline  
Old July 10, 2012, 01:14 PM   #9
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
Yup, they are great rifles, indeed.
Amsdorf is offline  
Old July 10, 2012, 02:36 PM   #10
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
The only complaint I have about the Yugo Mauser Patern Rifles is that there is no source available for a replacement Firing Pin. I have tried to locate one so I would have a spare and have not found one yet. I have heard that you can modify a Mauser 98 Firing Pin and make one that will work but to do this would require a Lathe. Other than that they are really great Rifles.
TX Hunter is offline  
Old July 10, 2012, 05:10 PM   #11
wpsdlrg
Senior Member
 
Join Date: August 18, 2009
Posts: 452
A 1903 Turkish Mauser pin will work. I have one in my M48 right now. A couple of the dimensions are 1 or 2 thousandths off (I can't remember which), but no matter....it'll work just fine anyway.

Numrich has them in stock. Part #1064040, if I remember correctly. About $35 (boy, the price has gone UP since I last bought one !)
wpsdlrg is offline  
Old July 10, 2012, 06:20 PM   #12
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
Thanks WplsDrg

Thanks I will snatch one up, while they are still available. I really apreciate it.
TX Hunter is offline  
Old July 11, 2012, 07:57 AM   #13
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,855
Amsdorf;

Thanks. The time flies...

It's one of those things that I pray can remain a "timeless" tradition, as I'm sure many Dads here do. Quality time, and the memories, are treasures for sure, as you eloquently stated.

As the older one is now off to college, it's the way of enticing him home for the weekend once a month to spend time with "Dear Old Dad"...
tobnpr is offline  
Old July 31, 2012, 11:49 AM   #14
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
WPSDLRG

Well I recieved the 1903 Turk pin yesterday. I will have to do some mimor fitting on the back of the Pin where it goes through the Cocking Piece but it looks like it will work. The diameter of the rear pin will almost go but is a little too thick. Im going to turn it down with a Cordless Drill and 400 grit sandpaper. Thanks for the advice
TX Hunter is offline  
Old July 31, 2012, 08:48 PM   #15
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,222
Quote:
Originally Posted by tobnpr
Thinking about picking up another, and scoping (an maybe a re-barrel) for a project.
I have an M24/47 that I turned into a sort of scout rifle. I used one of those scope rail adapters that replace the original ladder sight (which allows restoring the rifle to original configuration with no scope base holes drilled anywhere) and mounted up an inexpensive handgun scope I picked up from either CDNN or Natchez Shooters Supply. Took it out to a friend's shooting club that has a 200-yard range and once we got the scope dialed in it was easily holding 4" groups using Ecuadorian mil-surp ammo.

I guess I won't win any high power competitions with it, but 4 inches at 200 yards is plenty good enough to make me happy.
Aguila Blanca is offline  
Old August 1, 2012, 11:14 AM   #16
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
AQUILA

That is good shooting. For Practicle Field Use you pretty much own everything within 200 yards with that Rifle.
TX Hunter is offline  
Old August 1, 2012, 05:13 PM   #17
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
Good shooting indeed.
Amsdorf is offline  
Old August 6, 2012, 10:15 AM   #18
TX Hunter
Senior Member
 
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,776
Saturday morning I was shooting with some friends. They were using a bench rest and scope to hit a plastic 16 ounce Diet DR Pepper bottle at 107 yards. It shocked them when I showed them that I could hit it without the bench rest with my old Yugo Relic. It felt good. .LOL
TX Hunter is offline  
Old August 6, 2012, 11:49 AM   #19
Amsdorf
Junior member
 
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
Indeed, how sweet it is. We should never let anyone believe, for a moment, the fine rifles of WWII were anything other that very, very accurate, deadly accurate both in the sense of defeating the enemy and deadly accurate for the loss of our own boys.
Amsdorf is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09558 seconds with 9 queries