The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 2, 2012, 12:24 PM   #1
LeopardCurDog
Member
 
Join Date: February 1, 2009
Posts: 81
9mm 147gr data needed

I looked and couldn't find any info on this specifically. I'll be loading some 147gr 9mm fmj, at subsonic speed. I'll be shooting it through a suppressor. I don't know if that makes a difference as far as cleaning burning goes. What's a good powder?
LeopardCurDog is offline  
Old August 2, 2012, 02:20 PM   #2
TATER
Senior Member
 
Join Date: November 19, 2002
Location: Mississippi
Posts: 904
My powder of choice for 147 does not tend to reduce well…..
But with a quick glance here, Looks like SR-4756 is going to work for ya.
http://data.hodgdon.com/main_menu.asp
TATER is offline  
Old August 2, 2012, 04:11 PM   #3
mumbo719
Senior Member
 
Join Date: June 27, 2008
Location: Tampa Bay, FL.
Posts: 345
I use 5gr AA#5 under 147gr X-Treme plated @ 1.135 COL.

Soft and accurate.
__________________
CZ 75 P-01 . CZ-75B . CZ 912 . CZ 920 . Glock 26 Gen 3 . Kimber Pro Crimson Carry . XDm 45 3.8 Compact . Ruger 22/45 MKIII
mumbo719 is online now  
Old August 5, 2012, 09:42 AM   #4
overkill0084
Senior Member
 
Join Date: August 7, 2010
Location: Northern, UT
Posts: 1,162
I use Unique with 147s (cast & plated). Works great.
__________________
Cheers,
Greg
“At the core of liberalism is the spoiled child – miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats.” — P.J. O’Rourke
overkill0084 is offline  
Old August 5, 2012, 09:53 AM   #5
fishbones182
Member
 
Join Date: August 1, 2012
Location: Florida
Posts: 98
I like unique and bullseye and tight group. You could try power pistole and blue dot as well.
fishbones182 is offline  
Old August 5, 2012, 11:21 AM   #6
Strafer Gott
Senior Member
 
Join Date: May 12, 2011
Location: New Mexico
Posts: 1,125
AA#5 burns clean in that loading, a big attraction for me. Little ports stay cleaner if you keep the lead out, too.
Strafer Gott is offline  
Old August 5, 2012, 09:17 PM   #7
LeopardCurDog
Member
 
Join Date: February 1, 2009
Posts: 81
Will be shooting plated or FMJ bullets only.
LeopardCurDog is offline  
Old August 5, 2012, 09:44 PM   #8
tkglazie
Senior Member
 
Join Date: December 3, 2011
Posts: 558
Please do not take this as proven load, but I am of the opinion that HP38 in the 3.5-4 range would work for you. VV N320 is also a good choice for heavy and slow loads in 9mm. If you have a chrono and start low while watching out for stuck bullets I think you can find a good load with one of these powders

I use 3.3-3.4gr N320 with my cast 147gr flatpoint bullets (1.160") and they run about 900fps. Very nice, easy recoil- like a baby .45 cal. All push.
tkglazie is offline  
Old August 5, 2012, 09:46 PM   #9
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,221
If go to Hodgdon's load data site where you'll find all the 147 grain loads they list are subsonic. If you don't mind being on the slow end of the velocity spectrum, Hodgdon Universal will burn cleanly and foul the suppressor least, I expect. It will work with either bullet type you are interested in.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08079 seconds with 9 queries