The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old July 4, 2012, 12:14 AM   #1
Junior Member
Join Date: July 4, 2012
Posts: 2
Savage 64f bolt assembly problem.

Hey all been awhile but I'm currently back in Oregon from my station in Florida. I went shooting at brown's and it was really dirty. I cleaned up after myself and others just to help out. But my main question is my Savage 64f (.22lr) kept jamming and just not firing shell would load and the trigger would pull but no strike. I came home and disassembled it and in the video I watched to do it he said that the "striker guide rod" ,is the best way to describe what it is, he stated that it was machine pressed into the bolt assem. wasn't supposed to move but upon cleaning mine it came out with out any pulling or force it fell loose. I pushed it back in but it came right back out. Is there anything I can do my self. I didnt want to use a rubber mallet yet before consulting others with more experience.

Sorry for the run on but it needed to be a little long winded and detailed to explain what the problem is.


Petty Officer Darneille, USN.
PettyofficerDarn is offline  
Old July 4, 2012, 03:24 AM   #2
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 11,867
You can buy the entire bolt assembly from Numrich for $47.85 + shipping and handling.
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old July 4, 2012, 03:46 PM   #3
Junior Member
Join Date: July 4, 2012
Posts: 2
not really looking to do that right now, financially obligated for other activities. was looking more for a DIY home fix.
PettyofficerDarn is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.10761 seconds with 9 queries