The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 9, 2012, 04:08 PM   #1
El suave
Junior Member
 
Join Date: June 9, 2012
Location: central TX
Posts: 9
new member

I'm new to the forum and to reloading what is the best kit i can get for begginers
El suave is offline  
Old June 9, 2012, 04:17 PM   #2
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,193
You will get a few different answers for this one based on personal preference. I don't think you will go wrong with Lee, RCBS, Hornady, etc. Pick one
TheNatureBoy is offline  
Old June 9, 2012, 04:19 PM   #3
DeadCenter
Senior Member
 
Join Date: September 17, 2006
Posts: 105
I started with the Lee 50th Anniversary Kit, it pretty much has everything you need to get started and doesn't cost an arm and leg. It gives you something to get started and if you decide you like it you can start adding accessories.
DeadCenter is offline  
Old June 9, 2012, 04:32 PM   #4
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS
Posts: 5,097
You didn't say what you are going to reload. Rifles and pistols will require one kind of setup while shotshells will require another.
Doyle is offline  
Old June 9, 2012, 04:42 PM   #5
Shootest
Senior Member
 
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 654
This is a great kit and it is on sale for a great price if you buy quickly.
http://www.midwayusa.com/product/749...tage-press-kit
It will load rifle or pistol and you will have it for the rest of your life.
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic.
NRA Life Member
Shootest is offline  
Old June 9, 2012, 05:11 PM   #6
El suave
Junior Member
 
Join Date: June 9, 2012
Location: central TX
Posts: 9
rifles and pistols is what ill be reloading for
El suave is offline  
Old June 9, 2012, 05:19 PM   #7
TXGunNut
Senior Member
 
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,854
Welcome to the affliction! Most of the starter kits look good to me, I'm partial to the RCBS but could have done just as well with a Hornady kit. Several similar threads here with good info about likes and dislikes; well worth the read. Stickies quite good as well. Most important component of your initial purchase is a good manual or three. Read the instruction section and the sections on your cartridges at least once before jumping in.
Have Fun!
__________________
Life Member NRA, TSRA
Smokeless powder is a passing fad! -Steve Garbe
I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove
My favorite recipes start out with a handful of used wheelweights.
TXGunNut is offline  
Old June 9, 2012, 07:45 PM   #8
Lost Sheep
Senior Member
 
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,058
Tell us of your needs

Thanks for asking our advice. I have questions for you first.

How much shooting experience do you have and what kind?

What kind of shooting will you be doing? Bullseye, IPSC, Silhouette, Bowling Pin, 1,000 yard match, Casual plinking? (OK, I know you are not going for 1,000 yard match. If you were, you would already know a lot of reloaders and probably would not have use the word "beginner".)

What are your motivations? Most new handloaders start for the economics of it, but many soon discover its other advantages.

What kind of quantities do you shoot now and do you contemplate for your future?

What caliber(s) do you intend to reload?

How much room do you have to set up a reloading bench?

Do you expect to be able to leave your tools set up all the time or will you put them away after each loading session?

What's your budget?

I have lots of advice. Some of it will be useless to you, some will be useful and other advice you will be better off to get from others. If we don't know you (at least a little) we are shooting in the dark.

Help us out, here.

Lost Sheep
Lost Sheep is offline  
Old June 9, 2012, 09:23 PM   #9
El suave
Junior Member
 
Join Date: June 9, 2012
Location: central TX
Posts: 9
i've been hunting and plinking my whole life i want to get into reloading to see what components work the best 1000 yrds no not yet i recently built a AR15 ss barrel that is very accurate i'm more into building loads that are what we call in texas tack drivers i know the gun has alot to do with it but so does ammo i have shot cheap reloads then shot hornady rounds and theres a huge differance i want to reload something that is consistant
El suave is offline  
Old June 10, 2012, 11:30 PM   #10
rtpzwms
Senior Member
 
Join Date: July 6, 2010
Location: OTS
Posts: 794
Start by reading this:

http://thefiringline.com/forums/showthread.php?t=230171
__________________
Experience is what you get when you don’t get what you want.
rtpzwms is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08158 seconds with 9 queries