The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old April 23, 2012, 09:14 PM   #1
nathaniel
Senior Member
 
Join Date: March 11, 2010
Location: North Dakota
Posts: 600
Heritage

Hello all, its been a long time. I just bought a brand new heritage rough rider in 357 magnumto on an impulse. I got it home, cleaned it all up. The cylinder locked up nice in both the hammer down and full back position. Well I took it out today and shot it about 20 times. Now my cylinder will move around alot in the full down position and slightly in the fully cocked position. Is this normal or do I need to do some work to it?
nathaniel is offline  
Old April 23, 2012, 09:42 PM   #2
the rifleer
Senior Member
 
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,257
This is a black powder forum, so you may not get the best replies, but when it is fully cocked that is when you want it to lock up tight. Check to see that all the pins and screws are secure.
__________________
There is no such thing as a stupid question, only stupid people.
the rifleer is offline  
Old April 23, 2012, 09:58 PM   #3
MJN77
Senior Member
 
Join Date: April 27, 2009
Location: on a hill in West Virginia
Posts: 696
No, this is the "Black powder AND cowboy action shooting" forum. Says so right there at the top. He's in the right place. How bad is the cylinder moving?
MJN77 is offline  
Old April 23, 2012, 10:13 PM   #4
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
Quote:
Originally Posted by nathaniel
slightly in the fully cocked position.
Slightly doesn't sound too bad to me.
Even Rugers will move slightly.
It sounds like it's breaking in.
Keep an eye on it until you feel confident that it's okay.
arcticap is offline  
Old April 23, 2012, 10:30 PM   #5
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 1,171
I check them like this. Pull the trigger and hold the hammer ALL the way back at the same time, that cylinder should be tight as in NO movement. But with the hammer fully cocked as in ready to fire, the cylinder on some will move ever so slightly as was mentioned above. Most of my revolvers will do this. As long as alignment is good BLAST AWAY!!
__________________
"You're so drunk you cant hit nothin, In fact you're probably seeing double"...."I have TWO GUNS one for each of ya"
deerslayer303 is offline  
Old April 24, 2012, 08:35 AM   #6
nathaniel
Senior Member
 
Join Date: March 11, 2010
Location: North Dakota
Posts: 600
Well I went over it again and 3 places on the cylinder will move around but the last 3 are solid as a rock. When in the full cocked position I don't think it moves enough to mess up the flight path of the bullet so I should be good to go. Deerslayer I did what you told me to do and it is solid as a rock. Thanks guys for all your help I really appreciate it.
nathaniel is offline  
Old April 25, 2012, 10:00 PM   #7
bedbugbilly
Senior Member
 
Join Date: November 19, 2009
Posts: 2,241
nathaniel - glad it's working for you. As already stated, just keep an eye on it as you shoot. From the sounds of it, you should be fine.

I've looked at some of the Heritage RRs - both rimfire and centerfire. For the price, they're a decent little gun.

Nothing like a SA . . . you can't get more "COWBOY" than what you've got . . which goes right along with this forum.

Good shooting' pard . . . .
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63
bedbugbilly is offline  
Old April 26, 2012, 01:14 AM   #8
BerdanSS
Senior Member
 
Join Date: April 3, 2011
Location: to close to other houses
Posts: 930
My brothers Rough Rider .45 LC did the same thing. As long as it doesn't get out of hand your GTG, check everything from time to time. His shoots great...personally though I just couldn't get over the transfer bar.
BerdanSS is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07807 seconds with 9 queries