The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 3, 2012, 11:37 AM   #1
WD40+21
Junior Member
 
Join Date: April 3, 2012
Posts: 1
.33 Winchester loads

I need a hunting load for a 1886 Winchester in 33 WCF. What powder and bullet would be right?
WD40+21 is offline  
Old April 3, 2012, 12:03 PM   #2
sc928porsche
Senior Member
 
Join Date: May 29, 2008
Location: now living in alabama
Posts: 2,433
According to "cartridges of the world"
200gr sp................H4895 with 45gr= 2200fps/2150lbs.
200gr sp..............IMR3031 with 40gr= 2100fps/1959lbs

200gr sp.........................factory= 2200fps/2150lbs.
__________________
No such thing as a stupid question. What is stupid is not asking it.
sc928porsche is offline  
Old April 3, 2012, 12:12 PM   #3
RevGeo
Senior Member
 
Join Date: September 18, 2011
Location: North Idaho
Posts: 155
Data from the Ideal Handbook #38 (published in 1951) for .33WCF:

Jacketed bullets - 200gr:
26.4gr of 2400, 44.5gr of IMR 4320, 46.0gr of IMR 4064, 42.0gr of IMR 3031 -

These are all max loads, so start at least 5% lower. The velocities for all these loads are somewhere around 2000-2300fps, so the modern day .338 bullets available might be a little stout in construction, but I'd load 'em up and shoot them into a wet phone book and see what kind of expansion you get. Probably a round nose bullet with plenty of exposed lead would work best. You're going to have to shop around some, I imagine.

Cast bullets ( great option for this caliber):
195gr gas check Lyman cast - 25.2gr of 2400, 17.0gr of IMR 4759, 16.0gr of Unique. These loads are in the 1700-1900 fps range. Excellent hunting loads for up to 125 yards on deer and elk.

Hope this helps,
George
RevGeo is offline  
Old April 3, 2012, 04:36 PM   #4
SHR970
Senior Member
 
Join Date: January 24, 2011
Posts: 555
Hornady Fourth Ed. Copyright 1991 Pg. 403

Bullet 200 gr. FP. Part #3315 Made specifically for the 33 Win.
Case: Remington
Primer: Winchester

Powder, Min, Max.
H4198, 28.0, 34.5
IMR 3031, 33.3, 40.0
IMR4064, 35.1, 41.2
H4895, 35.1, 45.1
W748, 37.1, 43.2

Per the manual "Because the 1886 action is not as strong as the more modern lever actions presently available, maximum loads listed should be approached with considerable caution."
SHR970 is offline  
Old April 18, 2012, 12:52 AM   #5
osprey176
Junior Member
 
Join Date: February 1, 2010
Location: western nebraska
Posts: 5
Hate to rain on your parade,but I'm pretty sure that Hornady 200 grain flat point is no longer made.I picked up a box many years back for reduced loads in my .338 Win,but haven't found any more for some time.Maybe Barnes Originals?
osprey176 is offline  
Old April 18, 2012, 03:36 AM   #6
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,307
The two people I've known who have loaded .33 Winchester have both used and sworn by 3031.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old April 18, 2012, 07:21 AM   #7
SHR970
Senior Member
 
Join Date: January 24, 2011
Posts: 555
osprey176...just quoting from the book...but you are correct. However, if it were me I would substitute the 200 gr. GMX (part # 33104) and work up a load with that. They are made for tube mag guns.
SHR970 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07323 seconds with 9 queries