The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 10, 2012, 06:51 PM   #1
Osage
Member
 
Join Date: September 27, 2005
Location: Missouri
Posts: 69
Mid Air Explosion?

Was helping my son test some 223 loads today. We were shooting the Midway 50 gr dogtown bullets over varget. One shot had a strange mid-air poof of smoke about 10 yards from the rifle. It was fairly large. Never saw that before. We were shooting through a chrono and that load for some reason was quite a bit faster. Did some unburned powder come out in a clump and burn mid-air? The load was 27 grains which fills the cart and is compressed. I checked my Lee manual and Hodgdon and both list 27.5 as the max.
Osage is offline  
Old March 10, 2012, 07:02 PM   #2
mrawesome22
Senior Member
 
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
Bullet came apart in flight.

It happens.
mrawesome22 is offline  
Old March 10, 2012, 07:14 PM   #3
Osage
Member
 
Join Date: September 27, 2005
Location: Missouri
Posts: 69
That would explain why we were one hole short in the target. Too cool.
Osage is offline  
Old March 10, 2012, 07:19 PM   #4
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 4,834
Short fuse?
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old March 10, 2012, 07:20 PM   #5
rg1
Senior Member
 
Join Date: November 6, 2001
Posts: 744
I'd guess that the bullet came apart, jacket separated and a poof of lead dust.
rg1 is offline  
Old March 10, 2012, 08:29 PM   #6
Scharfschuetzer
Senior Member
 
Join Date: January 28, 2012
Location: Puget Sound
Posts: 293
Do you have a 1 in 7 or 8 twist on your son's rifle? The fast twist barrels really rotate the bullets fast and the lightweight varmint bullts with thin jackets will, as you noted, come apart.

Some quck math with some assumptions on my part:

Your 50 grain bullet from a 1 in 10" twist barrel at 3300 fps has a rotational speed of 3,960 rotations per second or 237,600 rotations per minute.
__________________
Scharfschuetzer
US Army Distinguished Rifleman
Washington State Distinguished Rifleman
NRA Police Distinguished Expert

Last edited by Scharfschuetzer; March 10, 2012 at 08:49 PM.
Scharfschuetzer is offline  
Old March 10, 2012, 08:39 PM   #7
Osage
Member
 
Join Date: September 27, 2005
Location: Missouri
Posts: 69
Not really sure. It's a Savage model 10 with the long bull barrel. I used to know this...
Osage is offline  
Old March 11, 2012, 01:06 AM   #8
scsov509
Senior Member
 
Join Date: November 22, 2006
Posts: 758
Quote:
Do you have a 1 in 7 or 8 twist on your son's rifle? The fast twist barrels really rotate the bullets fast and the lightweight varmint bullts with thin jackets will, as you noted, come apart.
+1, I've had that happen in my 1:8 twist with Barnes Varmint Grenades
scsov509 is offline  
Old March 11, 2012, 07:54 AM   #9
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 4,010
I was in the pitts pulling targets when the target on my left came up with insufficient during 200 yard RF. There might have been a couple of holes but not the ten needed.

Next string the target still had insufficient, maybe a couple of holes.

When I got on the firing line I asked the shooter what happened.

He was firing a .223 AR15 with cheap .223 bullets. They were blowing up in flight. His second string, he completely loaded his 20 round magazine and shot them all off in his 60 second rapid fire string! Having been down in the pitts I can tell you, 20 bullets did not make it to the target.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Old March 11, 2012, 08:26 AM   #10
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,928
27 grains of what powder? If it is a comressed load -- seems like it's too close to max.
jaguarxk120 is offline  
Old March 11, 2012, 08:49 AM   #11
243winxb
Senior Member
 
Join Date: July 26, 2011
Posts: 921
The bullet jacket gets damaged by a rough throat/leade. This causes it to come apart. Give the rifle a good cleaning with solvent and brush.
243winxb is offline  
Old March 11, 2012, 04:57 PM   #12
Peter M. Eick
Senior Member
 
Join Date: August 3, 1999
Location: Houston, Texas
Posts: 2,864
I used to do that with my 220 swift for kicks.

On a calm morning, the lead will melt out of the bullet and leave a sort of faint misty smoke line from about 15 yrds out to when the lead is gone.

The target would normally get hit with fragments of copper if it got hit at all. Once the lead was gone, the bullet would go pretty wild.
__________________
10mm and 357sig, the best things to come along since the 38 super!
Peter M. Eick is offline  
Old March 11, 2012, 05:39 PM   #13
thallub
Senior Member
 
Join Date: November 20, 2007
Location: South Western OK
Posts: 2,064
Quote:
On a calm morning, the lead will melt out of the bullet and leave a sort of faint misty smoke line from about 15 yrds out to when the lead is gone.
In the early 50s i inherited a model 70 Winchester in .220 Swift and started reloading ammo for that gun. Some of the .22 caliber bullets would not stand up to heavy .220 Swift loads and we had some "blue streaks".
thallub is online now  
Old March 11, 2012, 06:47 PM   #14
semi_problomatic
Senior Member
 
Join Date: July 27, 2009
Location: Ft. Polk
Posts: 869
Now that sounds like fun. Does it foul your barrel pretty bad with lead or is it all pushed out? I read about tighter twist seperating light bullets, never knew what it looked like.
__________________
Freedom's just a word. If I'm gonna die for a word, my word is jello...
semi_problomatic is offline  
Old April 11, 2012, 10:50 AM   #15
Osage
Member
 
Join Date: September 27, 2005
Location: Missouri
Posts: 69
Might explain why I see vapor trails behind my 6.5 swede? I found that very odd.

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
Osage is offline  
Old April 11, 2012, 11:33 AM   #16
hornetguy
Senior Member
 
Join Date: January 14, 2011
Location: on the north side of DFW
Posts: 794
naaah.... you see vapor trails behind the bullet on your Swede cause it's just such a COOL rifle...

I watched a guy at the range after he said "watch this"... he was shooting an AR with a fast twist barrel, and EVERY shot would disintegrate the bullet about 20yds out.. He told me that his load was a little too hot for that bullet. I said, "you think?"

He's the guy that would scotch tape dimes to his target at 100 yds and poke holes in them with one of his AR's... didn't miss them very often.
__________________
I always felt that if I got to the point where I thought it was time to bury my firearms, it was actually time to pick them up..
hornetguy is offline  
Old April 11, 2012, 01:14 PM   #17
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,648
Midway claims that the Dogtown bullets can be pushed up to 4,400 fps... but most people experience unsatisfactory results, even at velocities as low as 3,700 fps. My own results (.220 Swift) were no different.

As other posters have stated... your bullet was so far beyond being "over stabilized", that the centrifugal force actually ripped it apart. With certain bullets, you'll see it happen far more often in dense air (cold weather or significantly lower altitude).
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is online now  
Old April 11, 2012, 01:20 PM   #18
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,085
FIL used to love the 17 Remington ( bear in mind this was like 22 years ago ) he had a hard time loading to the top loads in the manuals & not have his bullets misteriously disappear in mid flight... ( like they were abducted by aliens... from Mexico or something )

as pointed out, the rotation is like crazy rpms... it's not uncommon to have either damaged enough, or gotten a bullet just not quite right, & have them come apart mid flight
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old April 11, 2012, 03:16 PM   #19
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,188
Osage,

I believe your Savage has a 9" twist. If the Dogtowns claim to tolerate being pushed to 4400 fps, presumably that's in a 14" twist barrel like the 220 Swift usually has. With 9" twist the same rotation rate will occur at 9/14×4400 fps or 2829 fps, and that will be your explosion proof upper limit. I'm sure you're well above that.

Since we don't know what powder you are using, it's impossible to guess at your velocity, but it's probably high. I'll suggest that any powder you need 27 grains of with a bullet that light is slower burning and less efficient for best work with it anyway. Especially if it is spherical, there is a chance of getting bullet base secondary pressures near the muzzle (see example in pressure plot below) and that could contribute to bullet distortion not to mention possibly causing barrel ringing over time.

On top of that you are wasting powder money. Something in the range of 18 to 19 grains of IMR 4198 would give you all the velocity that bullet can be sure to withstand with your barrel twist rate. You can then experiment with working it up faster to 21.9 grains, Hodgdon's upper limit and 3350 fps in Hodgdon's test barrel, and see where the bullet loses reliability. It's groups will probably start opening up by then, anyway, so I'd just stop where the accuracy is best.

I think you are spinning the bullet beyond its limits, but take the suggestion to clean the barrel well anyway. I like Boretech Eliminator best for this. Put a couple of wet patches through using a plastic Hoppes jag (Eliminator eats brass jags), let it sit 20 minutes, then repeat until the blue stops coming out.

With kind permission to reproduce from Jim Ristowe at RSI:
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Old April 11, 2012, 03:42 PM   #20
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 5,281
'vapor trails ' ? Perhaps smoke rings ? Search for photos of smoke rings from a big 12" or 16" naval gun , that's VERY impressive !!

http://civilianmilitaryintelligenceg...un-fire-photos

Found it , these are REAL guns !!
__________________
And Watson , bring your revolver !

Last edited by mete; April 11, 2012 at 03:49 PM.
mete is offline  
Old April 11, 2012, 04:29 PM   #21
Osage
Member
 
Join Date: September 27, 2005
Location: Missouri
Posts: 69
Powder was varget. Only one busted up. We settled on a lighter load and got great accuracy. I forget what the chrono said but if I remember correctly that one round was higher than the others. Fluke or loading error.

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2
Osage is offline  
Old April 11, 2012, 04:55 PM   #22
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,188
Hodgdon thinks you'd be at around 3400 fps with those bullets, so that probably gives you an idea of the true limit. You might aim at 3000 fps instead and see if they hold together and stay accurate.

Varget is liked for heavier match bullets in the .223 Rem. You may be able to get the 77 grain SMK to stabilize in your 9" twist bore OK, too. It's heavier than is usually fired with that twist, but it's stubby and the calculators think it may be OK. I don't know anyone using Varget for light bullets. Being a stick powder it is at least less prone to the secondary pressure issue. But I'd get IMR 4198 or maybe Reloader 10X and just settle for loading that Dogtown bullet down in the 9" twist bore.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12362 seconds with 9 queries