The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 10, 2012, 08:44 PM   #1
JJT10
Member
 
Join Date: January 7, 2011
Posts: 28
62 g bullets ordered ?

I ordered 1k bullets from Hi-Tec Ammunition. Got the pulled and resized 62 g for the 223. For 70$ I Have not gotten them yet and am wondering if these are military bullets. I thought I read some forum somewhere that the mil spec bullets arent lead, and that the bullet is longer then normal. If this is true i am looking for any thought for loading, i have Varget powder that i have been using. Any one else try these bullets? Figured for the price they would be great for plinking.
JJT10 is offline  
Old April 10, 2012, 09:00 PM   #2
Adamantium
Senior Member
 
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 980
Yeah those are military surplus bullets. They have a steel penetrator in the nose which makes the length of the bullet longer. It doesn't matter accuracy wise if you are shooting a 1:9 or faster barrel. They are good bullets but will eat up steel targets. Fine for shooting at tin cans or paper targets though.

If you are a member of thehighroad.com here are a couple of good pictures to give you an idea of how these bullets are different (you have to be logged in as a member to see them) http://www.thehighroad.org/showthread.php?t=418871
__________________
New gun, same ol' shot.
Adamantium is offline  
Old April 10, 2012, 09:45 PM   #3
pspc271
Member
 
Join Date: January 5, 2012
Location: Camden, DE
Posts: 28
Let us know how they shoot!
pspc271 is offline  
Old April 11, 2012, 03:19 AM   #4
NWPilgrim
Senior Member
 
Join Date: September 29, 2008
Location: Oregon
Posts: 2,141
I load these same type pfo bullets with 24.6 gr of Varget. Obviously double check this with your own load data sources, and as always start lower and work up for your own rifle and conditions.

I use this same Varget powder charge for 60 gr Nosler Ballistic tip (.851" bullet length), Barnes 62 gr TSX (0.912"), pulled M855 (0.872"), and Sierra 65 gr BTSP (0.852").

Here are the max pressure loads from my sources for these bullets. I used the M855 bullet for the QuickLoad calculations and all are seated to 2.250". I shoot out of a 5.56 NATO AR15 (62,000 psi) so I use closer to max SAAMI than I normally would.

Quickload max for .223 pressures (55,000 psi) and M855: 24.6 gr

Quickload for NATO pressure (62K psi) and M855: 25.2 gr

Hodgdon max for Sierra 63 SP: 26.4 gr (that is correct, not a transposition of my load)

Barnes max for 62 gr TSX: 25.5 gr

Hornady max for 60 gr VMAx: 24.9

Sierra: does not list Varget for 65 gr BTSP; but IMR4064 which is usually very close to the same charge weight as Varget is listed at 24.7 gr

Nosler max for 60 gr: 24.5 gr
__________________
"The ultimate authority ... resides in the people alone. ... The advantage of being armed, which the Americans possess over the people of almost every other nation ... forms a barrier against the enterprises of ambition."
- James Madison
NWPilgrim is offline  
Old April 11, 2012, 08:13 AM   #5
JJT10
Member
 
Join Date: January 7, 2011
Posts: 28
Thanks for the data that will deffinatly be a help in formulating my starting point. Once I get them in i can start some loads and test them out.
JJT10 is offline  
Old April 11, 2012, 01:50 PM   #6
JJT10
Member
 
Join Date: January 7, 2011
Posts: 28
Just came in today started going through them gonna start up some loads tommorow to take to the range Saturday. Gonna start at 22g varget and work up to 24g, I have been loading hornady 75g hpbt at 22g and they shoot nice. I remember when I worked those loads out I did 1/2g increments and noticed a huge difference, a 1/2g made. Being 1 1/2" groups to being all overthe target. Suold be a good weekend.
JJT10 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07897 seconds with 9 queries