The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old March 31, 2006, 03:37 PM   #1
LaDel Richards
Junior Member
 
Join Date: March 31, 2006
Location: washington
Posts: 1
in need of some info on hawes .357

I have an older 357 that i would like to know the year of it and possibly what it may be worth. On the left side of the barrel it says HAWES FIREARMS CO. LOS ANGELES,CALIFORNIA MADE IN WESTERN GERMANY BY J.P. SAUER & SOHN 3/18813 AND THE # 68, on the right side it saysWESTERN MARSHAL .357MAG. CAL. If anyone knows anything about them please help me to learn.
LaDel Richards is offline  
Old March 31, 2006, 07:39 PM   #2
RJay
Senior Member
 
Join Date: November 2, 2005
Location: Arizona
Posts: 1,647
Theres not a lot of history to review LaDel, During the the late 50s and into the 60s there were a number of westerns on TV. There were as many as 32 different shows , Lawman, Gunsmoke ( 22yrs), Have gun will travel, The Guns of Will Sonnet, The Westerner, Maverick, Sugarfoot,Wagon Train, Rawhide, and so on and so on. This caused a demand for western single action guns. About this time Colt decided to stop making the Colt Peacemaker ( real smart people). Hawes helped feed the demand by importing single action type guns from both Italy and Germany. They had about 8 to 10 different single action Marshall series. You could get them blued, chromed , half and half, Pearl handles, Rosewood,etc, etc. The Western Marshall was blue only and made by the German firm of J P Sauer and Sons . Introduced in 1968, discontinued in 1980. The value is not high and there's not much of a collectors market for them. In exc cond about 200 down to 135 in good. e-gunparts has some parts for them . I don't know of any records that would pinpoint the just what year your gun was made ( Hawes is long gone and I don't believe Sauer is making handguns anymore). Best I can do, hope that helps.
RJay is offline  
Old April 1, 2006, 08:47 AM   #3
Quantrill
Senior Member
 
Join Date: February 28, 1999
Location: Arizona, USA
Posts: 725
I have a Hawes Western Marshall in .44 mag that I bought in 1968. My wife uses it for C.A.S. I had an inch cut off the barrel and changed the front sight for quicker sight picture aquisition. My finicky gunsmith pronounced the gun, "a solid sixgun". Quantrill
Quantrill is offline  
Old April 18, 2011, 09:09 AM   #4
roboink
Junior Member
 
Join Date: April 18, 2011
Posts: 6
Hawes Western Marshall

Contact Sig Sauer via e-mail and give them your guns serial number. I have a Hawes Western Marshall in 44 mag. I e-mailed them with the number and took them a few days, but found it was made in 1968.
roboink is offline  
Old July 14, 2011, 10:39 PM   #5
Dockingbay327
Junior Member
 
Join Date: July 14, 2011
Posts: 1
Hawes Sauer & Sohn 44 Marshal serial number

@ roboink- What email address did you use? I called SigSauer today and the guy told me they lost the records in "the war" and cannot track that?
I have a 44 mag Western Marshal that I just got and would love to know when it was made. 20859/4 is stamped into it.
Your help would be appreciated. Thanks
Dockingbay327 is offline  
Old April 3, 2012, 08:59 PM   #6
roboink
Junior Member
 
Join Date: April 18, 2011
Posts: 6
Sig Sauer e-mail

I e-mailed the company in Germany...go to their website. I will see if I can find it...
e-mail is : fiss@sig-sauer.de

the name is Sigrid Fiss of Sig Sauer.
roboink is offline  
Old April 4, 2012, 05:22 AM   #7
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,629
Since these revolvers were proofed after the war, there should be a two-digit date stamp over the proof-house stamp (like a "68" over an antler, meaning it was proofed in 1968).
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old April 4, 2012, 09:28 AM   #8
gyvel
Senior Member
 
Join Date: August 30, 2009
Location: Northern AZ
Posts: 5,229
Quote:
I called SigSauer today and the guy told me they lost the records in "the war" and cannot track that?
ROTFLMAO!!!!!!!!!!
gyvel is offline  
Old April 7, 2012, 10:25 AM   #9
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,436
I have a .44 model for 30-35 years. It shoots well and the barrel,frame, and cylinder are of good steel, but there is a lot of "Potmetal" on it.
Gunplummer is offline  
Old April 7, 2012, 01:11 PM   #10
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,431
Quote:
I called SigSauer today and the guy told me they lost the records in "the war" and cannot track that?
There was a war in Germany in the 1970s???
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07649 seconds with 9 queries