Suppressing a FNAR 7.62 x 51 and a regular barrel length AK

benfishin · October 8, 2011, 06:47 AM

I was told by a dealer that I won't be able to adequately suppress my FNAR or my fold under stock AK with the AAC 762 SDN-6. Opinions?

customaquatics · November 8, 2011, 09:16 AM

the only place i have actually seen that has successfully suppressed a AK is red jacket cause of the gas tube is.

Skans · November 8, 2011, 09:45 AM

I guess with an AK you'd have to suppress the gas tube and the muzzle. The action is pretty noisy as well - heck, just wrap the entire thing in Corning insulation! (but make sure you register your insulation on a Form 1 first)

Willie Lowman · November 8, 2011, 11:48 AM

Depends on how you define adequately suppressed.

Will they be "hearing safe" (under 140 decibels)? Probably not.

380guy · March 4, 2012, 05:30 PM

FN LAR's and LF FAL's vent gas out the adjustible gas block. If you Google a You Tube video you can see what the shooter looks like after attaching a suppressor to it.

Solution would be to close the gas block but then you will be hammering your bolt group against the receiver pretty hard.

SR420 · March 5, 2012, 01:56 PM

I have no experience with the FNAR, but my 7.62x39 AKM is hearing
safe with a .30 caliber Windtalker suppressor attached to the DC Vortex.
The same AKM cycles Engel Ballistic Research sub sonic ammo when suppressed.

I have an UltiMAK gas tube rail on my AKM and it has the holes in it.

Crioche · March 14, 2012, 04:31 PM

I've fired an AK with a suppressor fitted and every time I received a jet of hot gas from the back of the receiver! That recess where the upper receiver engages with the rear of the return spring; I have no idea what was going on inside the suppressor (which worked well), but it was uncomfortable to use.

October 8, 2011, 06:47 AM	#1
benfishin Member Join Date: July 4, 2011 Posts: 23	Suppressing a FNAR 7.62 x 51 and a regular barrel length AK I was told by a dealer that I won't be able to adequately suppress my FNAR or my fold under stock AK with the AAC 762 SDN-6. Opinions?

November 8, 2011, 09:16 AM	#2
customaquatics Senior Member Join Date: March 13, 2011 Location: illinois Posts: 678	the only place i have actually seen that has successfully suppressed a AK is red jacket cause of the gas tube is. __________________ 23 year old NRA member AKaholic #158907 , 1942 Ex-Sniper Izzy Mosin Nagant, 1970's Marlin 30-30, Remington 870 tatical, Charter Arms The Pink Lady 38 Special.

November 8, 2011, 11:48 AM	#4
Willie Lowman Senior Member Join Date: March 5, 2009 Location: Uh-Hi-O Posts: 1,932	Depends on how you define adequately suppressed. Will they be "hearing safe" (under 140 decibels)? Probably not. __________________ "No, it's not a silencer. This little doodad is my own invention. I call it a loudener." --Sledge Hammer

March 5, 2012, 01:56 PM	#6
SR420 Senior Member Join Date: May 12, 2005 Posts: 2,542	I have no experience with the FNAR, but my 7.62x39 AKM is hearing safe with a .30 caliber Windtalker suppressor attached to the DC Vortex. The same AKM cycles Engel Ballistic Research sub sonic ammo when suppressed. I have an UltiMAK gas tube rail on my AKM and it has the holes in it. __________________ facebook.com/M14HDW.US

March 14, 2012, 04:31 PM	#7
Crioche Member Join Date: March 2, 2012 Location: Northwest UK Posts: 36	I've fired an AK with a suppressor fitted and every time I received a jet of hot gas from the back of the receiver! That recess where the upper receiver engages with the rear of the return spring; I have no idea what was going on inside the suppressor (which worked well), but it was uncomfortable to use. __________________ Mike

November 8, 2011, 09:45 AM	#3
Skans Senior Member Join Date: November 20, 2008 Posts: 6,243	I guess with an AK you'd have to suppress the gas tube and the muzzle. The action is pretty noisy as well - heck, just wrap the entire thing in Corning insulation! (but make sure you register your insulation on a Form 1 first)

March 4, 2012, 05:30 PM	#5
380guy Member Join Date: February 12, 2012 Posts: 49	FN LAR's and LF FAL's vent gas out the adjustible gas block. If you Google a You Tube video you can see what the shooter looks like after attaching a suppressor to it. Solution would be to close the gas block but then you will be hammering your bolt group against the receiver pretty hard.