The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old March 1, 2012, 08:20 AM   #1
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
cz 82

bought another cz 82 and should be here in a few days from aim.
hope their as good as everyone else says,as i have one i bought about 8 months ago and have not shot yet.kind of funny?
i loaded about 800 rounds of 9x18 that i have used in a p64 that have worked great.all cases were turned down 9x19.
anyway hope im not"shooting my self in the foot"!!!
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 1, 2012, 11:18 AM   #2
rburch
Senior Member
 
Join Date: July 15, 2007
Location: Blacksburg VA
Posts: 687
Well if you decide you just can't stand them I'll take at least one of them off your hands.

Never fired one either, but have yet to find anyone that has that doesn't like them.
__________________
I must not fear. Fear is the mind-killer. Fear is the little-death that brings total obliteration. I will face my fear. I will permit it to pass over me and through me. And when it has gone past I will turn the inner eye to see its path. Where the fear has gone there will be nothing. Only I will remain.
rburch is offline  
Old March 1, 2012, 12:21 PM   #3
jh9x18ky
Member
 
Join Date: January 17, 2007
Location: KY
Posts: 47
Yea... they are junk... you wont like it.... But I would be willing to take it off your hands... I have 2, and they are my all around favorite. I have carried 1 until there isnt much finish left. Great pistol, accurate, 12 rounds, stouter than a 380, and have never had either of mine fail. And if you like the P64, you will REALLY like the CZ 82.
__________________
"If you carry a gun, people will call you paranoid. That's ridiculous. If I have a gun, what in the hell do I have to be paranoid for." Clint Smith
jh9x18ky is offline  
Old March 5, 2012, 02:07 PM   #4
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 1,134
I just got mine from AIM

These pistols are REALLY NICE! What a robust pistol (all steel baby). I paid the extra 10 bucks for hand select and this gun has no holster wear, heck no wear on the finish at all, I can't be certain but I don't think it was issued. The magazine springs are really stiff and no finish wear on the mags either. The bore shines like a new penny also. I am SUPER happy. And AIM ships FAST!! I even like the holster that comes with it. Its an older police black leather holster, you can hang it on your belt or it has another attachment that clips on so the pistol drop down on your thigh a little. Let us know how yours is when you get it.

And I have no idea what the green nylon rope is for that comes in the box either. It has a clip on one end and a loop on the other. I guess thats a lanyard to clip on the butt of the gun and then to your belt to keep it from hitting the ground if you drop it.
deerslayer303 is offline  
Old March 5, 2012, 02:33 PM   #5
CWKahrFan
Senior Member
 
Join Date: November 3, 2010
Posts: 1,792
Quote:
...bought about 8 months ago and have not shot yet...
Jeeesh... If you're that pressed for time, send it over to me for a couple of years... I'll try it out for ya'... he he
__________________
What did Mrs. Bullet say to Mr. Bullet? ... "We're having a BeeBee!"...

IF THE SHOE FITS, WEAR IT!... IF THE GUN FITS, SHOOT IT!
CWKahrFan is offline  
Old March 5, 2012, 03:25 PM   #6
twins
Senior Member
 
Join Date: October 1, 2010
Posts: 393
Quote:
i loaded about 800 rounds of 9x18 that i have used in a p64 that have worked great.
So what is your favorite formula?
twins is offline  
Old March 5, 2012, 07:04 PM   #7
Young.Gun.612
Senior Member
 
Join Date: April 28, 2010
Location: Minneapolis, MN
Posts: 400
Walked away from buying one at a gun show this past weekend. Muzzle was worn, scratches in the finish, and a big ugly import stamp on the side. Guy refused to deal, even when I told him I could get it online for about $80 cheaper, but preferred to go home with one that day. Said something along the lines of "well santa claus is dead and our prices are right. I aint doing no dealing" so I said fine, I was trying to give you a cash sale, but you have yourself a nice day.
Young.Gun.612 is offline  
Old March 5, 2012, 09:06 PM   #8
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
twins-check back in a day or so and will post what i load.i need to go out to shop and check.
do you reload for 9x18?

i also will give update on new pistol when it gets here on thursday.
order took longer, due to when i ordered it ,they did not have hand pick option.the next day they did, so i had them change it.
i always wonder if hand pick is worth it or if some joe blow just takes one
off the top of the pile and says "ha ha-hand picked"?
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 5, 2012, 09:07 PM   #9
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
as for not shooting my first one,i bought it when i bought a few surplus hand guns within the same few weeks and just never got around to it.
may end up refinishing the worse one? any one else had good luck on a cz refinish?
__________________
nra member
proud father and patriot

Last edited by woody wood; March 5, 2012 at 09:26 PM.
woody wood is offline  
Old March 6, 2012, 09:27 AM   #10
jsmaye
Senior Member
 
Join Date: July 18, 2008
Location: Amarillo, Tx
Posts: 616
I bought a CZ vz82 a couple of years ago and was not impressed by the condition of the painted finish, though the pistol was in good overall shape. I bead-blasted it and gave it a new hot-bluing. Before -



After -

__________________
No matter how big and tough you are, when a two-year-old hands you a toy phone you'll answer it.
jsmaye is offline  
Old March 6, 2012, 10:17 AM   #11
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 1,134
Very Nice Jsmaye! I must have gotten lucky mine is super nice no wear at all. I'm chomping at the bit to see what the OP gets from AIM. If his is nice then that'll tell me (in theory) that they got a nice batch and I'll order another.
deerslayer303 is offline  
Old March 6, 2012, 09:12 PM   #12
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
so twins- heres what ive done with 9x18

using berry's 95 gr
cci sp
bulleye 3.2 and 3.4 gr
oal .984 to .980
trim 9mm case to .706
loads have worked fine in p64

have s&b factory load which is
col .975
case .707

lyman manual states
case trim at .713
oal .984

hornady
case trim at .708
oal max .984

have not checked fps
seems to cycle ok
no signs of overpressure
seems like factory load.
need to do more work.

any advice from anyone else who reloads?
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 6, 2012, 11:47 PM   #13
irish52084
Senior Member
 
Join Date: March 28, 2011
Location: Washington, the state, not that "other" one.
Posts: 514
jsmaye: That hot blue job came out fantastic. My 82's finish is still good, no chipping, but it's got some marks in it and I might just have to try bluing it myself. That or maybe I'll just duracoat it black.

I wonder how an 82 would look with a high glossy bluing and some nice wood grips?
irish52084 is offline  
Old March 7, 2012, 01:51 AM   #14
CWKahrFan
Senior Member
 
Join Date: November 3, 2010
Posts: 1,792
Interesting CZ82 thread:

http://thefiringline.com/forums/show...ighlight=cz+82
__________________
What did Mrs. Bullet say to Mr. Bullet? ... "We're having a BeeBee!"...

IF THE SHOE FITS, WEAR IT!... IF THE GUN FITS, SHOOT IT!
CWKahrFan is offline  
Old March 7, 2012, 10:15 AM   #15
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 1,134
Woody,
Here is my 82 from AIM. I've also noticed that classic arms has them back in stock too. I need to clean up the ejector a little but, its in very nice shape. Looks like it was made in 1990


deerslayer303 is offline  
Old March 7, 2012, 10:51 AM   #16
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
looks good deerslayer!!
my first one looks almost as good.
did you do hand pick?
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 7, 2012, 11:16 AM   #17
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 1,134
Yeah I did the hand pick, and I read that you did too. So I'm interested to see what you get. This is probably the nicest "hand pick" C&R I've ever gotten. I'm speculating that AIM has a nice batch in stock.
deerslayer303 is offline  
Old March 7, 2012, 12:32 PM   #18
DJHShadow
Member
 
Join Date: January 24, 2006
Posts: 15
Woody wood:

I have a Vz 82 I got from J&G some time back. It was part of a group they had sent out, bead blasted, and parkerized. Great gun! I also reload for 9x18. While the 9mm para. cases can be shortened you have to be very careful with the inital firing. 9x18 chamber dimensions are not those of 9mm para. they have a larger diameter and you "could" have a case rupture. You also have to check your case mouths carefully (because of the bigger "bell" you need) after you case moth expand AND after seating the bullet. Trimming 9mm cases was popular years ago when the Russian Maks started being shipped here. Now that 9x18 brass is available there isn't a great need to shorten the para. brass.

I use 3.4 gr of TiteGroup and the Hornady XTP's with good results and high confidence. They feed and cycle just fine.

Not trying to be a smart a$$ about your reloading habits or style. You may be the safest reloader on the planet. I've been reloading a few decades myself and have both eyes and all my fingers.
DJHShadow is offline  
Old March 7, 2012, 02:46 PM   #19
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
djh i never take advice the wrong way because we all are not perfect.
thanks for advice-that is why most people are on here is to help each other!
ya i know-- ive been thinking about a order starline brass in 9x18 soon.
trimming is a pain and marking headstamp so it does not get in with 9x19 is a
pain.
wonder if starline is the only one with brass,may just buy reloadable ammo?
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 7, 2012, 02:51 PM   #20
woody wood
Senior Member
 
Join Date: January 13, 2010
Location: minnesota
Posts: 257
deerslayer--
just got my cz82
will post pictures soon.
the condition is better than the other i have. other than a light scratch here
or there i would say it looks just like yours in the picture-same condition.
i thing it is a 1989 production?
holster looks like new.
__________________
nra member
proud father and patriot
woody wood is offline  
Old March 7, 2012, 03:44 PM   #21
jal5
Senior Member
 
Join Date: January 12, 2009
Location: NE Ohio
Posts: 411
Woody mine is a very similar load to yours using that Berrys plated bullet. I also cast using a Lee mold 95 gr round nose and it works very well in my CZ 82 with Bullseye. This was a purchase from AIM about 18mos. ago. Joe
__________________
We live in the greatest country on Earth- always be thankful!
jal5 is offline  
Old March 7, 2012, 03:45 PM   #22
DJHShadow
Member
 
Join Date: January 24, 2006
Posts: 15
Woody: Thanks for being a good sport. One never knows how advice will be handled. I don't post much (14 posts in 6 yrs still has me at the "junior" level) but when it comes to safety - I feel an obliation to say something.

Midway is back ordered on Starline right now.

http://www.midwayusa.com/product/941...mm-9mm-makarov

Not a bad price and it is good quality stuff.

Take care - Don
DJHShadow is offline  
Old March 11, 2012, 09:41 AM   #23
RUT
Senior Member
 
Join Date: November 17, 2004
Location: NH, USA
Posts: 690
I've been considering picking one up, but am put off by the sparse magazine supply as well as the cost when you do find them.
__________________
"Foreign Aid: The transfer of money from poor people in rich countries to rich people in poor countries."
RUT is offline  
Old March 12, 2012, 07:40 AM   #24
jsmaye
Senior Member
 
Join Date: July 18, 2008
Location: Amarillo, Tx
Posts: 616
Really? The lack of spare magazines keeps you from buying a great handgun?
__________________
No matter how big and tough you are, when a two-year-old hands you a toy phone you'll answer it.
jsmaye is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12564 seconds with 9 queries