The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 31, 2012, 01:44 PM   #1
cptmclark
Senior Member
 
Join Date: November 22, 2004
Posts: 377
Rem 700 bolt and magazine.

My 700 adl in 30-06 is my primary hunting rifle. I also like to shoot from the bench, and notice the bolt rotates on sear release. Very little, but a slight roll to the right as the pin moves forward (handle moves down a hair). It feels like there is a lot going on in that bolt, and I wonder if it just has a heavy pin and slow lock time. It's enough that I can not hold the cross hairs completely still on target when dry firing the rifle. Maybe 3/8 " movement on target at 100 yards. That's a lot. Is this normal for the model, or can I fix it?

Also, the blind magazine follower has started not lifting the rim high enough to be picked up by the bolt. The front of the cartridge comes up just fine. Is that likely just a weak spring, or is there something more sinister going on?

Thank you for all help and ideas.


Mike
cptmclark is offline  
Old February 1, 2012, 12:35 AM   #2
NESHOOTER
Senior Member
 
Join Date: October 16, 2009
Posts: 509
Mike, I would say it's your trigger that has you pulling off target even dry firing and, then I first just inspect the mag well to ensure its not binding on the follower.
NESHOOTER is offline  
Old February 1, 2012, 11:35 AM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,539
Slight bolt movement when the striker falls is not unusual.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old February 1, 2012, 07:15 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 20,019
The magazine follower could be binding, or the action screws are loose and allowing the magazine spring to get between the magazine box and the stock. But NOTE, please. If you remove the stock on that gun, be very careful in reassembly. If the magazine sping does slip between the magazine box and the stock, tightening the action screws will crack the stock.


Jim
__________________
Jim K
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06912 seconds with 9 queries