The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 27, 2012, 07:59 PM   #1
finrot
Member
 
Join Date: February 19, 2006
Location: Stamford Ct.
Posts: 94
1911 field strip

I am buying a 1911 45 and I see advertised for 1911's a wrench for the barrel bushing. My question is do you need to remove the bushing to field strip to clean, and if so which is a good one to buy. thanks
finrot is offline  
Old January 27, 2012, 08:27 PM   #2
dabluesguy
Member
 
Join Date: August 3, 2011
Location: Eastern Orygun
Posts: 91
Yes, you need to remove the barrel bushing to field strip it. They make the wrench in metal or some sort of plastic or nylon or something. They are very useful and don't cost much.
dabluesguy is offline  
Old January 27, 2012, 08:45 PM   #3
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,725
You don't need the wrench unless you have a custom fit bushing.
Hawg is offline  
Old January 27, 2012, 08:49 PM   #4
Nathan
Senior Member
 
Join Date: July 1, 2001
Posts: 1,959
The metal typ with the bump seem best to me, but 99% don't need any wrench.
Nathan is offline  
Old January 27, 2012, 08:51 PM   #5
jimbob86
Senior Member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 6,818
Mine does not need a wrench.....
__________________
TheGolden Rule of Tool Use: "If you don't know what you are doing, DON'T."

http://nefirearm.com/
jimbob86 is online now  
Old January 27, 2012, 11:32 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,515
Accurizing a 1911 involves a close fit of the barrel to the bushing and a tight fit of the bushing to the slide, tight enough that a wrench may be needed to remove the bushing. But a standard factory or GI pistol will not need a wrench to remove the bushing.

Jim
__________________
Jim K
James K is offline  
Old January 28, 2012, 02:01 PM   #7
finrot
Member
 
Join Date: February 19, 2006
Location: Stamford Ct.
Posts: 94
Thank you for all who took time to reply
finrot is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07129 seconds with 9 queries