The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 18, 2012, 07:12 PM   #1
Redneck_Riot
Member
 
Join Date: December 15, 2006
Posts: 80
WAlther PPKS out of battery

I have a Smith and Wesson Walther PPKS that is having out of battery issues, I have detailed cleaned the pistol, have ordered a new recoil,fring pin, and ejector spring currently in the mail. While I wait for the replacement parts I would like to ask the members here what is the most common reason for an out of battery failure? also I am having FTF both feed and fire, when I force the slide closed the pistol fires normally and this is why I think it's the recoil spring tension. I took this gun in on a trade and have no idea of the round count. I appreciate any help or insights on this matter, thanks.
Redneck_Riot is offline  
Old January 18, 2012, 07:15 PM   #2
sirgilligan
Senior Member
 
Join Date: October 28, 2009
Posts: 417
Please don't take this wrong because I don't know your experience level with firearms... so, you probably already know there is a big end and little end on the recoil spring, the smaller end (tighter fit) goes on first down the barrel.

Sorry if you already know this, and I don't mean to be anything but helpful.
__________________
SirGilligan
If there isn't a photo then it never happened.
Gun Log SPC iOS Range Book
If you find your back is up against a wall, maybe you have been backing up for too long.
sirgilligan is offline  
Old January 19, 2012, 08:27 PM   #3
Redneck_Riot
Member
 
Join Date: December 15, 2006
Posts: 80
no offense taken, thanks for the help
Redneck_Riot is offline  
Old January 19, 2012, 09:04 PM   #4
DnPRK
Senior Member
 
Join Date: August 24, 2001
Location: LC, Ca
Posts: 1,778
Disassemble the slide and clean out the hole for the extractor spring. Then clean and lightly oil the extractor spring and the extractor plunger.
DnPRK is offline  
Old January 20, 2012, 04:17 PM   #5
Roughedge
Senior Member
 
Join Date: January 24, 2011
Location: Monroe,NC
Posts: 370
Are you shooting reloads or factory loads? if the crimp is off you wont get the correct headspace.
__________________
The man that die's with the most stuff win's!
Roughedge is offline  
Old January 20, 2012, 04:35 PM   #6
Redneck_Riot
Member
 
Join Date: December 15, 2006
Posts: 80
all factory loads
Redneck_Riot is offline  
Old January 20, 2012, 10:34 PM   #7
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,960
Can you describe the out-of-battery failure a bit more? Those guns are straight blowback and usually can be a bit out of battery with no problem. And the mechanism that prevents firing out of battery so much that cases swell or burst is pretty good and fail safe and rarely has a problem.

Also, and I hesitate to say this, make sure the ammo is correct, .32 ACP or .380 ACP, not, say, .32 S&W.

Jim
__________________
Jim K
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06878 seconds with 9 queries