The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old January 13, 2012, 09:19 PM   #1
Nakanokalronin
Senior Member
 
Join Date: July 29, 2006
Posts: 908
Questions for those with a Polish P64...

I recently picked up my 1971 P64 and took it down for cleaning and installation of the Wolff springs when they arrive. The hammer and sear look to be in excellent condition with almost no wear but I had a few questions about other parts.

I noticed the hammer strut seems to be peened down in an area where it's suppose to be a point. Looking at how the hammer acts in relation to the strut makes me wonder if it's an issue at all.

The arrow points to the point I'm referring to



Second part is the firing pin. I'm not sure how much the firing pin is suppose to stick out of the safety when in the firing position but it seems barely enough for the hammer to hit. The other is the peening on the front of the safety tab. It's more than likely due to dry firing from the previous owner weather that be here or Poland, who knows. Not sure if it's an issue.



The third thing I noticed was the recoil spring did not have flat ends like everyone seems to say is how the factory makes them. The hammer spring was defiantly stock with that horrendous trigger pull but the recoil spring seems to be light like the 18lb factory type, yet with no flat ends.

Nakanokalronin is offline  
Old January 14, 2012, 06:24 AM   #2
kingwc
Member
 
Join Date: January 24, 2010
Location: Kentucky
Posts: 39
Try this site for help on the P64

http://www.p64resource.com/forum/viewforum.php?f=1
kingwc is offline  
Old January 14, 2012, 04:46 PM   #3
Nakanokalronin
Senior Member
 
Join Date: July 29, 2006
Posts: 908
I posted there and quite a few other sites. Most other sites gave me some good responses, but that forum was a little slow with them. I did recieve a couple but came to the conclusion of the other forum's help that I will just replace the parts that are peened.
Nakanokalronin is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06575 seconds with 9 queries