The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old December 30, 2011, 09:35 AM   #1
rrogers
Junior Member
 
Join Date: December 30, 2011
Posts: 2
Italian Cap & Ball Maker Question

I have an Italian made copy of a .44 blackpowder revolver.
I was told it was an "1861 Navy"
It has a navy scene on the cylinder
It is brass framed case hardened with what looks like a CSA on one side of the brass next to the grip, (the "S" is backwards)
The AE in the square box denotes a 1979 manufacture year.
It has "For blackpowder use only - made in Italy" on the barrel
The only possible manufacture mark is above the serial number - it is a circle with 3 letters starting with a "D" to the the right above is a "G" and then below the "G" is either another "G" or a "C".
Does anyone know who manufactured this?
I know what the Umberti, Pietta, and Army San Marco marks look like and it is not them.
rrogers is offline  
Old January 1, 2012, 03:34 PM   #2
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 4,922
This should be asked in the Black powder section. There will be more members there that can answer questions concerning cap and ball replicas.
I have a number of black powder guns Umberti, Flli Pietta, Dixie and Navy arms. All were made in Italy.
The only one I have somewhat like yours is an 1860 Dixie gun works which is in 36 Cal and octagon barrel, with the naval seen on the cylinder.
It’s not unusual for Italian manufactures to not mark their guns. I think that they are built and sold to companies like Dixie and they stamp the gun. I have an 1851 Navy and the Dixie lettering across the top of the barrel are nothing like the manufacturing markings throughout the gun. Of the 9 that I own only 5 have manufactures name on them the remainder ether have no name or have the US company that sold them
I’m afraid that none of my guns match the markings on yours but then again I only have two 61’s.
Ozzieman is offline  
Old January 1, 2012, 03:40 PM   #3
jhenry
Senior Member
 
Join Date: May 27, 2006
Location: Ozarks
Posts: 1,813
None of the real Navies were .44's. Navies were .36's. In addition, the frame may be brass, and it may be case hardened, but it can't be both. If it is a case hardened frame it is steel or iron. Brass will just look like brass.

That being said, there have been copies of Colt Navies that were sold in .44 instead of .36, it could be one of those. A picture would help. I am guessing it is a 1860 Army, or a 1851 Navy made as a .44.
__________________
"A Liberal is someone who doesn't care what you do, as long as it's mandatory". - Charles Krauthammer
jhenry is offline  
Old January 1, 2012, 04:15 PM   #4
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 4,922
I think what he meant was the frame was steel and the trigger guard and forward grip frame was brass. Also it’s probably not case hardened but chemically made to look like case hardening.
Ozzieman is offline  
Old January 1, 2012, 07:22 PM   #5
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,217
Photos would help ... a lot.
Aguila Blanca is offline  
Old January 1, 2012, 09:18 PM   #6
Hawg Haggen
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,649
Armi san Paulo which later became Euroarms.
Hawg Haggen is offline  
Old January 1, 2012, 11:50 PM   #7
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,844
Is it brass framed or color case hardened frame with brass backstrap & triggerguard? Round barrel or octagonal barrel? Creeping loading lever or hinged loading lever? As Aguila Blanca said, pictures would help immensely.

It sounds like its an 1860 Army revolver; but pictures, would nail it down.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07764 seconds with 9 queries