selector switch block for M16A1

gotur6 · December 21, 2011, 08:42 PM

Hello,
I am trying to find this Selector Switch block in the picture. I can not find it anywhere. My department bought 3 M16's with it on them all. Keeps people from putting rifle in full auto. A friend from a neighboring department just purchased several for his department, and wanted to know where to get them at. I am trying to track some down so he can purchase. Can anyone help? Thank you very much.

armsmaster270 · December 21, 2011, 09:03 PM

Check your National Guard Armory they are put on when troops are sent to civil disturbances. Note they break off easily but if you use your thumb to break it you will get a bloody gash in your thumb.

Superhouse 15 · December 22, 2011, 09:40 PM

You could probably have one made locally for pretty cheap. If not, Brownell's has a conversion, but it's $50. Not sure what your budget is. A couple local agencies bought them for their M16s.

http://www.brownells.com/mobile/aspx...aspx?pid=17665

Ridge_Runner_5 · December 23, 2011, 12:05 AM

You could also just buy standard semi auto safeties. Those will not flick to the 3rd position.

mkk41 · December 29, 2011, 09:38 PM

Maybe try Colts Law Enforcement Sales Dept.

December 21, 2011, 09:03 PM	#2
armsmaster270 Senior Member Join Date: November 25, 2008 Location: California Posts: 1,951	Check your National Guard Armory they are put on when troops are sent to civil disturbances. Note they break off easily but if you use your thumb to break it you will get a bloody gash in your thumb. __________________ http://www.armsmaster.net-a.googlepages.com http://s239.photobucket.com/albums/f...aster270/Guns/ Retired LE, M.P., Sr. M.P. Investigator F.B.I. Trained Rangemaster/Firearms Instructor & Armorer, Presently Forensic Document Examiner for D.H.S.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

December 22, 2011, 09:40 PM	#3
Superhouse 15 Senior Member Join Date: September 13, 2007 Location: Sunny Florida Posts: 844	You could probably have one made locally for pretty cheap. If not, Brownell's has a conversion, but it's $50. Not sure what your budget is. A couple local agencies bought them for their M16s. http://www.brownells.com/mobile/aspx...aspx?pid=17665

December 23, 2011, 12:05 AM	#4
Ridge_Runner_5 Senior Member Join Date: February 8, 2008 Location: Denver, CO Posts: 1,925	You could also just buy standard semi auto safeties. Those will not flick to the 3rd position.

December 29, 2011, 09:38 PM	#5
mkk41 Senior Member Join Date: December 4, 2004 Posts: 283	Maybe try Colts Law Enforcement Sales Dept.