The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 28, 2011, 12:25 PM   #1
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
Llama pistol parts source

FOR THOSE SHOOTERS WHO ARE SEARCHING FOR PARTS NO LONGER MADE FOR YOUR LARGE OR SMALL FRAME LLAMA AUTO PISTOL, I HAVE LOCATED A SUPPLIER. ORDERED A REPLACEMENT SEAR & IT ARRIVED AT MY HOME IN LESS THAN 1 WEEK:

LEE'S GUN PARTS
3401 WEST PIONEER DRIVE, UNIT #2
IRVING, TEXAS 75061
PH: 972-790-0773 FAX. 972-313-0991

www. leesgunparts.com

HOPE THIS INFO WILL BE HELPFUL TO THE READERS OF THIS FORUM.

GURU1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old March 28, 2011, 02:30 PM   #2
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,189
Lee has been an awesome source for many years. Good customer service and great man to deal with.
__________________
NRA Chief Range Safety Officer, Home Firearm Safety and Pistol Instructor
"There are three classes of people: those who see, those who see when they are shown, those who do not see."
Leonardo da Vinci
CowTowner is offline  
Old April 4, 2011, 02:49 PM   #3
ingrammc
Junior Member
 
Join Date: April 4, 2011
Posts: 1
Seriously!

this guy is right down the street from me and i have been looking for Llama parts for 3 MONTHS

THANK YOU !
THANK YOU!
THANK YOU!
ingrammc is offline  
Old April 9, 2011, 09:26 PM   #4
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
Llama parts source

Was happy to share this info with the members of this forum. That is what shooters are supposed to do. Don't keep info like this a secret----someone somewhere can benefit from it. Your thanks for my efforts are much appreciated.
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old December 23, 2011, 04:44 AM   #5
Rmasters3
Junior Member
 
Join Date: September 13, 2009
Location: Northern Kentucky
Posts: 4
Has anyone ever gotten a response?

I have tried calling and I sent a fax. Lee's has no email address.

Nada
Rmasters3 is offline  
Old December 23, 2011, 06:09 AM   #6
big_bad_kitty
Member
 
Join Date: April 22, 2010
Posts: 72
He is there! He has been there forever and is not going anywhere. His storefront is amazing and most of the Irving/Grand Prairie cops stop by routinely. If you get in a hurry you can forget it. He stays so busy that he will never catch up. I have a S&W 629 that I purchased back in the 80's and carried as a duty weapon for years. It has many rounds through it and never gave me a problem. It locked up and would not run at all so I took it to him. He took it apart in less than three minutes, said it needed a guide rod and began to hunt in his parts stock. I don't know how he finds anything in his shop but he knows where everything is. Five minutes later he comes back up front and has about a dozen guide rods in his hands and begins to match them to my particular gun. Now for the important part, he finds three that look like brand new and I tell him I want one to run with and an extra just in case. He asked for $10 for the pair, not $20 but a total of $10! Now all you naysayers out there if you are scared he will rip you off that is fine. Go look elsewhere as he is busy enough as is. I am lucky enough to be within an hour of his shop and wife and I go to her mom's at least every other week now in GP as she is 95 and living alone. Lee's is 1/2 block off the path on the way so it is no problem to stop in for a few minutes to pick up parts. If you are really in a bind and need something right now, the only way to get it from Lee's is to stop by his shop or see him at a gun show in the Metroplex. He has been around at least 35 years that I know of and is one of the most reputable guys that I have known. He also has some off duty/retired officers that do some gun work on the side and you cannot beat the quality of work or the knowledge that is there in his shop! Huge thumbs up for Lee and his shop and it is a shame there is only one of him! JMHO!!
__________________
NRA Endowment Life Member - TX Concealed Handgun Instructor
Experience - What you get when you don't get what you wanted!
texasconcealedhandguninstructor.com
big_bad_kitty is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06789 seconds with 9 queries