The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 11, 2001, 01:06 PM   #1
jtduncan
Senior Member
 
Join Date: December 5, 1999
Location: Seattle, Washington, USA
Posts: 1,681
Does anybody have some nice target TiteGroup 10mm loads using some copper-plated bullets like Berry's, Rainiers, or West Coast bullets?

I'd like to try several weight bullets from 155, 165, and 180 to develop some target and plinking loads out of my Glock 20. Factory or lighter is my goal for this batch.

I have 1000 - 180 grain CHP (copper plated hollowpoints) from Berry's. I worked up a load up with 5.5 grain TG and the Berrys 180 but got some keyholing.

I'll check my OAL. What OAL are you using? 1.24? 1.25?

But I know the keyholding was from my reloads because some factory PMC 170s shot accurately for me.

I'm not ready for the hotter stuff yet.
Don't have my KKM 6" fully supported barrel yet.

Some of my dealers have heard of some keyholing problems with the G20.

I can get TG for $13.50 a one pounder and 1,000 Berry's bullets for $59 delivered. As you can see, it's an economoical way to practice with your 10mm.

Hodgdon really doesn't do a good job of listing other 10mm weights like 135, 155, and 165 on their website. They only list 180 and 200 grain load date for the 10mm.

Any good target loads using TiteGroup for a 10mm newbie?
__________________
The Seattle SharpShooter - TFL/GT/AR15/SGT/PCT/KTOG/SWF/RF/HKPRO/OA2/1911Forum
Reloaded .223 Rem, 9mm, 40SW, 357 SIG, 10mm, 44 Spl, 44 Mag, 45 ACP Today?
jtduncan is offline  
Old February 11, 2001, 01:24 PM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
No. Wrong 10mm powder. Try W231. OAL = 1.250"
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05924 seconds with 9 queries