The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old October 22, 2011, 05:49 PM   #1
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,455
A Drilling, in the corn field?

Thought I'd a recent experience with Y'all. Went to a local gun auction and while going down the rows of tables full of guns, there in front of me, was a Drilling. We are talking about a small rural town in Iowa and most of the good old boys are into shotguns. when the auctioneer came to the drilling, he stated a starting price of $3,000 dollars and you could have heard a pin drop. Pretty soon and few turned to look at each other and I heard one guy say; what the heck is that? The auctioneer then stated that if no one was interested in the starting bid. Then the bidding was closed as the reserve price was much higher. No one said a word so back to the owner it goes. ...

This is the third Drilling I have ever seen and it was a beauty. All engraved and external hammers and locks. the two top barrels reportedly were 16Ga. and the bottom barrel was never identifies. Looked like in the .250 or .270 range. I too had set a $3000 range or estimate and that was too rich for me as well as the other lads. .....

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old October 22, 2011, 07:26 PM   #2
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,342
A lot of drillings got "liberated" after WWII. Asking prices in the US are crazy for some reason, they are selling much cheaper in Germany where people actually use them. The rifle barrel is typically some German rimmed cartridge, 7x65R for example. A lot of the prewar guns were chambered for 16/65, so they are not safe for modern 16/70 rounds, even if they fit. Another reason not to buy into the price frenzy.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old October 23, 2011, 03:25 PM   #3
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
Don't worry, you didn't miss anything - That Drilling's owner was WAAAAY too proud of what he had there.

FWIW, hammer drillings usually had the shot barrels short chambered (2-9/16" ILO 2-3/4") and the rifle barrel was most likely a pre-WWI unobtanium metric number.

That was a $1900 gun, IMHO - IF it was made by a noted maker (Sauer, Simpson, etc), the ribs were tight & shot barrels unbulged.

.
PetahW is offline  
Old October 23, 2011, 05:03 PM   #4
Shotgun693
Senior Member
 
Join Date: September 3, 2011
Location: Poteet, Texas
Posts: 959
Yep, before you buy one you need to know IF you can get shotgun shells to fit, they are out there but you need to be a reloader to afford to use'm much, and the caliber/round the rifle barrel uses. Some drilings are 12 ga over .38-55 and are very desirable. I've seen one in 16 ga over 7mm Mauser that was a shooter.
If you can get ammo they are nice guns to have.
Shotgun693 is offline  
Old October 23, 2011, 05:09 PM   #5
azyogi
Member
 
Join Date: June 12, 2010
Location: Tucson
Posts: 88
Ein Zwei Drei

Why if three is drei, is it spelled Drilling?
azyogi is offline  
Old October 24, 2011, 10:05 AM   #6
Geezerbiker
Senior Member
 
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 526
Drei is 3, drilling is triple.

Tony
Geezerbiker is offline  
Old October 24, 2011, 11:19 AM   #7
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
There are drillings on the market today that make 3K look like the down payment as well

Most likely metric rifle cartridge - maybe 7X57, 8X57mm JRS, or something else

just about every cartridge is still readily available

Weight can become a factor with some of these guns. There are a lot of them from the 20's and 30's here - and prices are all over the map - depending on WHO made it, not just its condition

Here's one with 2 different rifle cartridges and a 20 gauge, a mere 90K:
http://www.gunsinternational.com/PET...n_id=100206531

while here is a no name for a decent price of 1600:
http://www.gunsinternational.com/Ger...n_id=100199606

They can be awesome to use if you like a touch of nostalgia
oneounceload is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06801 seconds with 9 queries