The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old September 27, 2011, 11:55 PM   #1
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
Steel Plate Matches With .22's - Video

Below is a short video from an indoor .22 steel plate match that was taken last week. My indoor .22 club has been sponsoring them for a few years now. We dedicate our weekly Friday match to .22 pistol, rifle, and revolver nights, with a practice night added in to shoot with any gun that fires .22LR.
It's been a boone for the club because we were primarily a .22 bullseye pistol club, but since that has been on the decline lately we developed this new activity. We have gained some new members due to it and a lot more people have discovered that our club exists.
A lot of folks have bought new guns and have learned how to shoot their old guns combat style, and at a lot faster pace and with more proficiency than they ever use to.
It's a fun activity for folks of all ages and both genders. We have at least 3 classes of shooters, and if someone wins their class twice then they must move up to a higher class.
And the relatively low cost of .22 ammo makes the activity that much more attractive verses shooting center fire.
There's additional info. located in the video description.

Shooting Steel Plates With .22 Pistols

http://www.youtube.com/watch?v=lOEXS...el_video_title
arcticap is offline  
Old September 28, 2011, 02:16 AM   #2
Griffin Armament
Junior Member
 
Join Date: September 24, 2011
Posts: 10
Awesome video!!! I would love to do that. Looks like a great time.
__________________
Visit our website and Blog Griffin Armament Sound Suppressors Like Us on Facebook
Griffin Armament is offline  
Old September 28, 2011, 01:50 PM   #3
eddie412
Junior Member
 
Join Date: September 6, 2011
Location: Northeast PA
Posts: 1
thats awesome looks so fun
eddie412 is offline  
Old September 28, 2011, 03:18 PM   #4
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,324
Wife and I used to attend Steel Challenge matches at our local club, in the .22 division.
Great fun, with sometimes faster times than the centerfires.
And no chasing brass!
If there's one in your area, don't miss the chance to do it.
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old October 4, 2011, 02:08 PM   #5
c.j.
Member
 
Join Date: July 8, 2011
Posts: 18
Very nifty! Any info available on the target stand...and what distances are shot? I think my local club might have enough interest for an occasional shoot like this.
c.j. is offline  
Old October 4, 2011, 03:14 PM   #6
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 4,812
I didn't think they allowed guns in the far left liberal communist state
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer, USPSA NROI Range Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Old October 19, 2011, 07:48 PM   #7
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
We shoot at the distance of about 33 - 35 feet.

We've made some brand new plates. They're more of a paddle design that eliminates the need to weld the thin lollipop stalk to the plate at the top and to the rack attachment at the base.
Because the paddle is wider at the base, the rack attachment can now be bolted to the paddle rather than welded. That forms a squared tubular housing that a bolt can be slipped through to attach the plate to the rack so that it will pivot and fall down when hit.
And these plates are also made from a tougher steel for increased longevity.
The original plates would break intermittently at the welds and become warped after many thousands of hits. So this new paddle design should solve those problems without much of any difference in performance.
Here's a short video of some .22 rifle matches using the new paddle plates.

http://www.youtube.com/watch?v=NNrecGCOqmM
arcticap is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07214 seconds with 9 queries