The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old September 8, 2008, 07:37 PM   #1
soldierboy9908
Junior Member
 
Join Date: September 8, 2008
Posts: 1
R.E. Terni 6.5 Carcano

My friend has an Italian Carcano and he is trying to find out more about the rifle. The only info I have right now on his weapon is that it is a R.E. Terni 6.5 Carcano. The model number is 36 XIV and the serial number is K9238. It has all of the markings on it of a carcano. It has the crown above the action as well as stamps on the stock. I could not tell you what these markings are at this time. If that is necessary for the identification of the origin of the gun then I will get that info. Can anyone help us farther on identifying this weapon? I do believe that it is a 6.5x52 carbine; is this correct as well?
soldierboy9908 is offline  
Old September 9, 2008, 08:39 AM   #2
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,619
Terni was one of the Italian government arsenals that built rifles for their militayr, and it sounds like he has one of the versions of the M1891 Mannlicher-Carcano rifle or carbine; Italy chambered its bolt-actions in either 6.5x52 Carcano or 7.35x51 Carcano, and some of these rifles were re-worked from one to the other. If the barrel is around 30 3/4" long, it should be the stock 1891 rifle; if the barrel is around 18" long, it should be either the 1891 cavalry carbine (which has a permanently-mounted bayonet that folds into the stock), or the 1891/24 TS carbine, which was an arsenal-shortened 1891 rifle for special troops ("Truppe Specialli"), but which should have a circular stamp showing the date it was re-worked and the arsenal doing the work. There was also an 1891 TS carbine built as a carbine from the beginning, from 1894 until 1938
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old September 9, 2008, 10:19 AM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,342
I haven't seen any model 36 Terni rifles in 6.5X52mm. IIRC, the model 36 in 7.35mm was supposed to be the replacement for the 1891 in 6.5mm due to the generally acknowledged need for a more powerful cartridge. It's possible it was rebarreled with a 6.5X52mm barrel when 7.35X51mm got hard to find, or it could have been originally barreled in 6.5X52mm for whatever reason.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old September 9, 2008, 04:50 PM   #4
ronl
Senior Member
 
Join Date: December 2, 2007
Posts: 741
I have one made in Terni that is 6.5 that was manufactured in 1940. Used to have one in 7.35 that was manufactured in 1939, but someone had sporterized it and I traded it for a type 38 Arisaka. The Italians started WW2 using 6.5 then experimented with 7.35 then went back to the 6.5 ammo. Don't know the case length of the ammo but I do have one original box of each caliber on stripper clips so I could pull it out and measure it. They also rebarreled some of these for 8mm Mauser. That's the one I'm looking for.
ronl is offline  
Old August 28, 2011, 05:50 PM   #5
milty
Junior Member
 
Join Date: August 28, 2011
Posts: 1
Terni Info

In 1969 I purchased one of these in, of all places, Dallas, Texas. It was one of a bulk sale, still in Cosmoline, and had a gunsmith clean it and check it out. It checked out I've fired many rounds of Carcano 6.5 through that "LongTom". The reason I mention Dallas is that this is the same type of weapon that Lee Harvey Oswald used and if you think that you can run 3 rounds through that long bolt action, in the time he allegedly did it, while reacquiring the target through a scope...you're superman.
milty is offline  
Old August 28, 2011, 09:15 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 18,661
There was no Model 36. The 7.35 was adopted in 1938, along with the Model 38 short rifle and carbine. But after war broke out in 1939, the Italians had second thoughts about changing caliber and most of the rifles and carbines made in 7.35 were recalled and rebarrelled to the old 6.5 caliber.

The 36/XIV date is the date of manufacture, not the model number, and that gun would have been made in 6.5 originally, since 1936 was before the adoption of the 7.35.

The Roman number may require some explanation. Among Mussolini's sillier ego trips was changing the calendar to date from the year of his march on Rome, 1922, which became the year 1. While most Italians just ignored the decree (as they still ignore just about everything else about government, figuring that if they don't notice it, it will go away), arms makers had to comply, so guns of that era have both dates.

Jim
__________________
Jim K
James K is offline  
Old September 6, 2011, 01:02 PM   #7
BlueTrain
Senior Member
 
Join Date: September 26, 2005
Location: Northern Virginia
Posts: 5,809
I recall hearing that Oswald was left-handed and manipulated the bolt with his right hand. Even so, it was pretty remarkable and I guess if he couldn't, there would be no story.

It's funny how odd things turn up in unexpected places and I once saw a case of 7.35 Carcano ammo sitting in a country store in West Virginia. I can't imagine who would up with it.
__________________
Shoot low, sheriff. They're riding Shetlands!
Underneath the starry flag, civilize 'em with a Krag,
and return us to our own beloved homes!
Buy War Bonds.
BlueTrain is offline  
Old September 6, 2011, 08:39 PM   #8
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,348
I have a very ugly Carcano I put a scope on and once you are used to a side mount it can be used very quickly. If your interested, I used a savage 340 side mount. Stamped sheet metal so you can bend it a little. Works good. The boys at deer camp call it "Lee Harvey".
Gunplummer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07558 seconds with 9 queries