The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 28, 2011, 02:27 PM   #1
prairiedoghunter
Member
 
Join Date: February 14, 2011
Posts: 19
Casing weight tolerances?

Just started my first batch of .204 ammo, fired some test rounds yesterday with the best group at 1/4moa, second best at about 1/3moa with charges being 25.6gn RL-15 and 27.3gn RL-15 respectivley. All brass used for the test rounds was the same weight. Now heres the question, how much tolerance in weight from shell to shell should be allowed for reloading say 100 or 200 rounds (have 100 to do right now)? I weighed 20 casings, with an average of 102.28gn and a standard deviation of .90. I allowed a tolerance of +- 1gn within the average to sort my brass. These loads are not competition loads and should shoot about 1/2 moa. Is this close enough, or should I sort casings within .5 or .1 gn?
prairiedoghunter is offline  
Old August 28, 2011, 03:14 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,221
Cartridge brass density is 8.53 gm/cc, according to Matweb. That means 0.853 grains, in identically trimmed and primer pocket uniformed cases, will represent 0.1 grains difference in powder space. Since pressure goes up exponentially with increase in powder charge, this is about like a 0.05 grain charge difference. Not usually a significant error. If you charge cases ±0.1 grains, then figure cases ±1.7 grains are roughly equivalent to that.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old August 28, 2011, 08:13 PM   #3
243winxb
Senior Member
 
Join Date: July 26, 2011
Posts: 959
Sort new brass by .1gr after fl sizing, trimming, uniforming the flash hole.
243winxb is offline  
Reply

Tags
.204 ruger , casing , moa , rl-15

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06280 seconds with 9 queries