The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old July 29, 2011, 12:34 AM   #1
kimokeo70047
Junior Member
 
Join Date: July 29, 2011
Posts: 3
Rifle Identification Help

I recently acquired a rifle from my father-in-law that he purchased from a gun show several years ago. He says it is an Enfield and is a .30-06. I have been unable to find anything on it or tell the make for sure.

At the time of purchase he was also told that it was used in WWII and that somewhere along the lines the barrel was shortened.

The only markings, other than a serial number, i have found are on the bolt.



I thank you in advance for any help or direction that you might have.
kimokeo70047 is offline  
Old July 29, 2011, 06:48 AM   #2
SDC
Senior Member
 
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,626
This is a 1917 rifle, made by several US manufacturers during WW1, and variously known as the "P-17", "Pattern 1917", "US Rifle, Model of 1917", etc. It is basically a copy of the British P-14, which was in 303 British, but the versions made for US use were in 30-06. The bolt handle and the safety behind the bolt are the give-aways here. The "flaming bomb" on the bolt handle is a US ordnance acceptance mark. There were enough of these in stock during WW2 that they were also issued at that time, and they were surplussed out after the war, with many of them being "sporterized" as hunting rifles.
__________________
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old July 29, 2011, 11:16 AM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,127
The US Model of 1917 was a .30-'06 version of the British Pattern 1913 and 1914, developed at the Royal Small Arms Factory, Enfield Lock, hence the name "Enfield." The term naturally carried over to the U.S. version, and the Model 1917 was universally known to American "doughboys" as the "Enfield". The other major U.S. rifle of WWI was the American "Springfield" (Model 1903), also called for the place where it was developed and made, Springfield Armory, in Massachusetts.

Jim
__________________
Jim K
James K is offline  
Old July 29, 2011, 08:50 PM   #4
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
The top of the front receiver ring was usually stamped with the info & SN - If a scope mount base was installed on your rifle, the scope base may be hiding the stamping(s).

.
PetahW is offline  
Old July 30, 2011, 01:08 AM   #5
kimokeo70047
Junior Member
 
Join Date: July 29, 2011
Posts: 3
Thank you

Thank you all, I really appreciate it.

The serial # is 400569.
kimokeo70047 is offline  
Old August 7, 2011, 01:27 AM   #6
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,135
"...the barrel was..." Hi. Should be 26". However, like SDC says, thousands of 'em were 'sporterized'. Can you post a picture of the whole thing?
Have a look here. http://surplusrifle.com/m1917/index.asp
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old August 16, 2011, 03:50 PM   #7
kimokeo70047
Junior Member
 
Join Date: July 29, 2011
Posts: 3
Picture

kimokeo70047 is offline  
Old August 16, 2011, 04:11 PM   #8
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 10,898
It has been extensively sporterized by shortening the barrel, installing a scope sight (which is a bigger project on a 1917 than other surplus) and bluing the metal. OK so far.

The miltary stock was cut way down and varnished, I don't think as well done as the metal work. At least he got the recoil pad approximately right.

Resale value is low, but it is a hunting rifle you would not likely wear out.
Jim Watson is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07206 seconds with 9 queries