The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old July 22, 2011, 05:50 PM   #1
chasep255
Senior Member
 
Join Date: December 21, 2009
Location: NJ :(
Posts: 688
Loading the Remington 1100

I love everything about my new 1100 except for loading the tube. I hate how I have to press that button before I can lift the carrier to get a shell in. Doing so is slow, annoying, and I sometimes even use two hands. Any aftermarket parts which could solve my problem? Also I would prefer to not have the carrier hanging out bellow the receiver.
__________________
I have mostly non-sporting firearms
In NJ, technically speaking, ALL guns are illegal
Also in my state there is such thing as a Class III BB gun :barf:
Happy to say that despite the NJ AWB I still manage to make my guns look scary
chasep255 is offline  
Old July 22, 2011, 07:29 PM   #2
M4BGRINGO
Senior Member
 
Join Date: March 22, 2011
Posts: 241
I have an 1100 and just last weekend was able to shoot it with more than one shell loaded at a time. I only use it for Trap Shooting and just about everywhere I go only allows one shell chambered at a time.

Anyway, I didn't know how to load more than one shell! I put my shell in by hand like I normally do, just kinda layed it in there, then hit the release on the bottom to close the chamber. Then it was a simple matter of using the nose of the next shell to press down on the small lever as I slid it forwards. There is a small catch that you need to get the rear of the shell past which holds it in place.

Practice with it, you'll see how easy it is.
M4BGRINGO is offline  
Old July 22, 2011, 07:31 PM   #3
oregunner
Senior Member
 
Join Date: May 12, 2011
Location: Oregon, of course
Posts: 136
What you do is push the button with the shell as you insert it. After you have done it a few times, it just comes naturally. You can turn the gun upside down to watch at first, but it really isn't hard to do by feel. My reply got beat by 2 minutes! Also, you can load the first shell in the open receiver, and close the receiver by hitting the button with the second shell, which clsoes the action as you load the second shell. Skeet shooters have this down to a science.
oregunner is offline  
Old July 22, 2011, 08:06 PM   #4
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
Load shell in chamber, press button to load gun, add as many as the mag will hold - what seems to be the difficulty?
oneounceload is offline  
Old July 22, 2011, 08:51 PM   #5
pabuckslayer08
Senior Member
 
Join Date: December 18, 2010
Location: South Central Pa
Posts: 692
1oz hit it right on, open it, insert shell into chamber, close it then slide the other 2 in the mag. If you think that is hard to get used to try a Beretta 400. Im still hitting wrong buttons on that thing.
pabuckslayer08 is offline  
Old July 22, 2011, 08:56 PM   #6
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,382
I load my 1100 for doubles as described in the owners manual. If this doesn't work for you, perhaps you'd be happy with a Dave's Easyloader conversion.
zippy13 is offline  
Old July 22, 2011, 09:02 PM   #7
chasep255
Senior Member
 
Join Date: December 21, 2009
Location: NJ :(
Posts: 688
Just to clarify. I know how to load and can load my 1100. It just find it annoying that the button has to be depressed in order to load a shell. That Dave's EasyLoaser looks nice so I ordered it.
__________________
I have mostly non-sporting firearms
In NJ, technically speaking, ALL guns are illegal
Also in my state there is such thing as a Class III BB gun :barf:
Happy to say that despite the NJ AWB I still manage to make my guns look scary
chasep255 is offline  
Old July 22, 2011, 09:58 PM   #8
lmccrock
Senior Member
 
Join Date: April 23, 2007
Location: Red Rock. TX
Posts: 788
The EZ Loader sticks out the bottom and it is the dickens to keep the slide open in a case because the EZ Loader replaces the button. I have one, but I am trying to load fast during 3gun matches.
lmccrock is offline  
Old July 23, 2011, 03:11 AM   #9
Slugo
Senior Member
 
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
1oz hit the nail on the head. 1100 is one of the easiest autos to use...
__________________
Sometimes wrong, but never in doubt...
Slugo is offline  
Old July 23, 2011, 11:02 AM   #10
ocharry
Senior Member
 
Join Date: October 20, 2006
Posts: 220
Remington also made or makes a lifter that they used on the competition master,,the button on the lifter is double in length and it makes stuffing shells in the tube very easy,,and it doesn't hang out the bottom of the receiver,,i have one on my 1100 and love it

I don't have the part no. from Remington but I may be able to round it up if interested

ocharry
__________________
YHS
ocharry
ocharry is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08120 seconds with 9 queries