The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old June 8, 2011, 03:19 PM   #1
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
Magazine wont feed

I have got 2 aftermarket magazines for a mini 30. One is a 20 round and one is a 30 neither made by Ruger. They will not feed correctly if at all. The two hook like shapes that hold the bullet down are to low and the bolt catches them and that is what stops the procedure. 1) Should I trash them, and buy factory? 2) Is there a way of fixing it so they will feed correctly?
InTheCountry is offline  
Old June 8, 2011, 07:49 PM   #2
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
Magazine question

Ship those mags back to who ever you purchased them from with a letter of explaining what the problem is & request 2 new replacement mags. If those do not work, send them back asap & request a refund or credit to your charge card.

Guru1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old June 8, 2011, 10:40 PM   #3
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
Do you think they will do it if I purchased them at a gun show.
InTheCountry is offline  
Old June 9, 2011, 09:33 AM   #4
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
Magazine question

If you purchased name-brand products at a gs, i would ship them to the manufacturer & explain what is happening:

1. Contact the man, through customer service / warranty dept.
2. Explain what the problem is. They will either immediately ship new replacements & ask you to send them the defective ones.
3. If you get replacement mags, send a letter of thanks to the man.

Give it a go & report back to the forum what your experience was.

Guru1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old June 9, 2011, 09:08 PM   #5
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
E-mail sent. Will report back when further steps have been taken.
InTheCountry is offline  
Old June 10, 2011, 07:43 PM   #6
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
They said they will replace or repair it.
InTheCountry is offline  
Old June 10, 2011, 10:25 PM   #7
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
MR. COUNTRY:

Congrats on posting the good news. Sounds as if your magazine problems are fading fast. Please report back to the forum with the name of the mags & your experience with the manufacturer.

Glad i was able to answer your question & assist to remedy your problem.

Guru1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old July 14, 2011, 03:51 PM   #8
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
So I finally got around to shipping it. The return was fast but unfortunatly unsuccessful. All they did to best of my knowledge was replace the spring and the platform of the magazine. Maybe bend something here and tweak something there but the problem has not been fixed. On my factroy magazine the back of the bullet sits farther down, on the after markets the back end of the bullet sits a little bit to high up, causing the feature that holds the bolt open to not me able to fall down far enough and the bolt wont close. Not sure what to do now
InTheCountry is offline  
Old July 14, 2011, 04:48 PM   #9
GURU1911
Senior Member
 
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
Magazine question

Ok, now is the time to ramp-up your efforts to get things corrected, by moving up the corp ladder to a customer service manager, who can take direct action & ship you brand new factory magazines.

Keep complaining, but don't yell or threaten. Be firm & remind them of how much you like their rifle & would really enjoy shooting it, if only the magazine would work !!!!!

Guru1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999)
METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!!

"THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06"
GURU1911 is offline  
Old July 14, 2011, 05:56 PM   #10
chack
Junior member
 
Join Date: May 24, 2011
Location: dixie
Posts: 477
mini 14s are notorious for being unreliable with aftermarket mags. I suggest you take a hard look at what your time is worth and how uch of your time you've wasted with crappy mags.

Your only real options are to buy factory mags (2-3 times the price of aftermarket) or buy a rifle that takes cheap USGI mags.

You can probably sell the crappy mini mags to some other sucker cheap to get some of your money back.
chack is offline  
Old July 14, 2011, 06:39 PM   #11
orionengnr
Senior Member
 
Join Date: July 9, 2004
Posts: 5,024
horrible advice

Quote:
You can probably sell the crappy mini mags to some other sucker cheap to get some of your money back.
My integrity is worth more than a few bucks. I have bought a lot of guns (and other things) in my life. Not all were as represented. I worked to try to correct the problem and if unable, fully disclosed the problem(s) to any potential seller.

For example, I bought four Kel-Tecs and each one's operation was flawed--some worse than others. I spent a lot of time F&Bing, lots of time on the K-T fora and time on the phone with K-T, time replacing springs and parts (free from K-T), money on ammo and mags.

In the end, none were reliable enough to carry. I sold each, at a loss, with full disclosure.

I have other examples, but you get the idea. Just because some dirtbag screwed you does not give you license to screw someone else...unless you are a dirtbag too.

Bottom line--I hope the manufacturer refunds your money. If not, do your homework in the future. Aftermarket Mini mags have had a bad rep for a long time, and with good reason. A few work, most don't.
orionengnr is offline  
Old July 15, 2011, 03:48 PM   #12
InTheCountry
Member
 
Join Date: May 11, 2011
Posts: 67
Im going to send them another email saying that the problem has not been fixed. I think im going to ask for my money back. Wonder how thats going to go. Maybe some store credit.
InTheCountry is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09174 seconds with 9 queries