The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old May 21, 2011, 06:43 PM   #1
champ198
Senior Member
 
Join Date: June 30, 2008
Posts: 217
does anyone have a starting load for 175gr S&W

i know about the pressures of the 40S&W and all that and was jsut looking for a starting point for it. not looking for hot loads jsut something to plink at the range not going to be Self Defense loads jsut range ammo only.
the 2 pistol powders i got are IMR trailboss and Winchester WSF will these be ok for these cast loads
champ198 is offline  
Old June 4, 2011, 04:02 PM   #2
Stick_man
Senior Member
 
Join Date: October 18, 2008
Location: Salt Lake City, Utah
Posts: 241
The best source for answers regarding your specific powders would be to manufacturer's website. There are a number of great loads and powders available for the 175gr cast. If you don't already have it, a great reference book is the Lyman Cast Bullet Manual #4. It lists quite a few. I have never loaded either of these powders, but have heard good things about WST, WW-231, Red Dot, Unique, Power Pistol, and a number of others. Because of it's bulk and low energy, I would be kind of surprised if TrailBoss worked very well in the .40s&w.

Are these bullets you cast yourself or did you buy some commercial cast ones? Do you know how hard they are?
Stick_man is offline  
Old June 4, 2011, 07:03 PM   #3
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,380
My experience with loading light pistol loads has primarily been with Bullseye in .38 and .45 cast bullet loads. It's a fast powder and does well with target/plinker loads. Between TrailBoss and WSF, TrailBoss has a burning rate closer to that of Bullseye. That's the powder I'd try first. Stick_man may be correct about its bulk/energy, but you indicated that you looking for light loads with the powder you have. I typically use powders around WSP's burning rate in larger revolver cases. YMMV
zippy13 is offline  
Old June 4, 2011, 11:12 PM   #4
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,099
Buy a Hodgdon manual or give 'em a call. Asking on the reloading forum might be faster.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06268 seconds with 9 queries