The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old June 4, 2011, 09:44 PM   #1
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,675
AR-15 question

Can someone tell me what the thread size and pitch is for the single screw that attaches the pistol grip to the lower receiver on an AR-15? And what length screw is required?

TIA
Aguila Blanca is offline  
Old June 4, 2011, 10:02 PM   #2
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,815
I cannot give you a perfect answer.I expect you need the screw and you want to go to the hardware store instead of ordering from Midway.I do not have a drawing,and I don't have a spare screw for one.I think if you go get a 1/4-28 by 1 in,and a 1/4-28 by 1 1/4 in,you can get it done.Now,there may be a metric designation,I can't say.Do not force it if it does not feel right.Get a slotted pan head Put a little blue loctite on.You could use a button head,but if your allen socket rounds out it will be ugly.
HiBC is offline  
Old June 4, 2011, 10:13 PM   #3
Hunter Customs
Senior Member
 
Join Date: March 26, 2005
Location: Osborn, Missouri
Posts: 1,853
My AR has a 1/4x28, however to my understanding some AR's have a 1/4x22.
I believe the screw in mine is 7/8 inch long.
Best Regards
Bob Hunter
www.huntercustoms.com
Hunter Customs is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05684 seconds with 9 queries