The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Lock and Load: Live Fire Exercises

Reply
 
Thread Tools
Old April 24, 2011, 09:43 PM   #1
frumious
Senior Member
 
Join Date: May 13, 2009
Location: Carrollton TX
Posts: 521
Smaller targets = better groups

Hi All,

Just wanted to post an observation. Normally I shoot at target strips like these. Each target is 5.5 inches across with a 3.5 inch colored center:



I shoot at these with a scoped bolt-action .308 rifle (100 yards) and several iron-sighted pistols (15 yards).

Recently I have been affixing small Shoot-N-See dots to the center of each target. This gives me a much more defined point upon which to place the cross hairs of the scope when shooting rifle:



The above strip was perforated by my .308, for what its worth. Load development.

Anyway, today I tried it with my pistols and found it has a similar effect. It gives me something a lot more precise to look for out there as I focus on the front sight (or try to, anyway). My pistol groups improved today and I think I will see additional improvement if I keep doing this.

Since there's nothing new under the sun, I figure I may have stumbled upon something everybody else already knew :-) Has anyone else made this (or similar) change to their target practice regimen, with similar results?

Also, I think this is why the traditional "bullseye" hold has the bottom edge of the target sitting on top of the front sight. It's a lot easier to tell when the target is exactly on top of (i.e. "just touching") the front sight vs. when the front sight is at the exact center of the target (i.e. swimming around).

-cls
frumious is offline  
Old April 24, 2011, 09:49 PM   #2
MLeake
Senior Member
 
Join Date: November 15, 2007
Location: Outside KC, MO
Posts: 10,128
"Aim small, miss small."
MLeake is offline  
Old April 24, 2011, 10:18 PM   #3
geetarman
Senior Member
 
Join Date: November 18, 2009
Location: Arizona
Posts: 2,736
I do the same for my 100 yard benchrest targets. I have found it better to adjust my sights to hit above the aiming point. Keeps me from losing the aiming point.

I have also heard of others who shoot one hole and use that as the aiming point.

Geetarman
geetarman is offline  
Old April 24, 2011, 10:33 PM   #4
FM12
Senior Member
 
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,598
What MLEAKE said.
FM12 is offline  
Old April 25, 2011, 12:00 AM   #5
BikerRN
Senior Member
 
Join Date: February 11, 2007
Location: "State of Discombobulation"
Posts: 1,333
Quote:
"Aim small, miss small."
I find this to be true.

Biker
BikerRN is offline  
Old April 25, 2011, 02:29 AM   #6
AZAK
Senior Member
 
Join Date: May 15, 2008
Location: the object towards which the action of the sea is directed
Posts: 2,103
I prefer to use the Shoot-N-C targets that have the little red dot center; my reticles are black, shows up better on red at 100 yards and beyond.

I also like the smallest target that they make for most of my shooting; unless sighting in a scope, then the bigger ones.

This is an image from sighting in my newest rifle. Don't have it fine tuned yet, planning on tomorrow for that, but the red dot in the center does help.

YMMV
Attached Images
File Type: jpg Shoot N C targets.jpg (230.5 KB, 78 views)
AZAK is offline  
Old April 25, 2011, 04:50 PM   #7
Old Grump
Member in memoriam
 
Join Date: April 9, 2009
Location: Blue River Wisconsin, in
Posts: 3,144
My standard target is a 50' small bore pistol target and I use it for everything from 50 yards to 200 yards for my rifles and at 25 yards for shooting off hand pistol. Without that great big bullseye lurking in front of my sights I am forced to look at the front sight of my iron sights or the cross hairs of my scopes. Works for me. It isn't the only target I use but for sighting in and serious shooting that is my choice.
__________________
Good intentions will always be pleaded for any assumption of power. The Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern will, but they mean to govern. They promise to be good masters, but they mean to be masters.
--Daniel Webster--
Old Grump is offline  
Old April 25, 2011, 08:56 PM   #8
orionengnr
Senior Member
 
Join Date: July 9, 2004
Posts: 4,978
Quote:
"Aim small, miss small."
I heard this several years ago, when I was trying to improve my handgun shooting.

I started using a 3x5 index card with a 1" orange sticky dot in the center, and have been doing so ever since.

It has worked well for me. I am not Top Shot material, but my handgun shooting improved markedly.
orionengnr is offline  
Old April 26, 2011, 12:43 PM   #9
hunter52
Member
 
Join Date: January 27, 2011
Location: Colorado
Posts: 99
For scoped rifles and peep sights I shoot at 2-3 inch squares or diamonds ,I can hold on one of the points with a scope and see if my crosshairs are off point of aim .For peeps, holding on the bottom of a diamond is easier for my fuzzy eyes than a circle.
hunter52 is offline  
Old April 26, 2011, 02:14 PM   #10
MLeake
Senior Member
 
Join Date: November 15, 2007
Location: Outside KC, MO
Posts: 10,128
I tend to prefer things like Zombie targets for fun shooting; but even then, you can aim small.

Examples: the v-notch on the zombie's t-shirt; the 3rd button on the zombie's button-down shirt; the right or left nostril; you get the idea.

Small and very easy to see works well.... until you put so many holes on and around it that it isn't there, at which time shift to a different, specific point.
MLeake is offline  
Old April 27, 2011, 12:40 AM   #11
COSteve
Senior Member
 
Join Date: September 6, 2009
Posts: 473
That's one of the reasons I practice at longer ranges than many; I want to hone my skills at bullet placement. 200 yds offhand, even with my 6" slide custom G20L pistol is hard but after I've gotten into the grove, a 12 yd target is child's play.
__________________
Steve

“Remember, no matter where you go, there you are.” - Buckaroo Banzai 1984
"When you find a find a big kettle of crazy, it's best not to stir it." - Dilbert 2009
COSteve is offline  
Old April 27, 2011, 01:24 PM   #12
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 4,770
I like the targets that the Appleseed project uses. At 25 yards they are simulating a distance out to 400 yards. www.appleseedinfo.org
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Old April 27, 2011, 08:24 PM   #13
4bfox
Member
 
Join Date: September 8, 2010
Location: Kansas
Posts: 98
Yeah...at 25 meters that 400yd target is about the size of a quarter...
__________________
"To anger a conservative, lie to him. To anger a liberal, tell him the truth." —Theodore Roosevelt
4bfox is offline  
Old May 2, 2011, 11:21 AM   #14
nazshooter
Senior Member
 
Join Date: November 7, 2008
Posts: 150
Yesterday my wife and I were out shooting some silhouette targets with pistols and my groups wern't very good. After a while I put some broken clays on my target stand and found that I could hit them pretty consistantly. I could even hit shotgun shells about half the time but you would never know it looking at my groups on paper.

Sent from my Droid using Tapatalk
nazshooter is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08368 seconds with 10 queries