The Firing Line Forums

Go Back   The Firing Line Forums > The Firing Line Gun Show > Retail Deals and Feedback

Notices

Reply
 
Thread Tools
Old April 7, 2011, 09:07 AM   #1
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 4,775
Marlin Firearms

Marlin Firearms has zero quality control in place. I purchased a Model 795 NIB and during the disassembly before shooting found a breech bolt that one side of it looks like it has sat in salt water for 6 months, They also did not install the assembly post which locks the action to the receiver so in essence it was a one shot rifle. It was sent back to the repair center and all that was done with regards to my two issues was the assembly post was installed. They chose to do nothing about the breech bolt. This is definitely the first and LAST Marlin I will ever buy. In hind sight Savage or Ruger would have been a much sounder purchase.
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Old April 13, 2011, 09:14 PM   #2
baddarryl
Senior Member
 
Join Date: March 29, 2011
Location: Cape Fear!
Posts: 939
I recently got an XL7 .270 that everything looks fine on. They did leave the strap swivel off the stock though which my dealer says was a first. My 981T .22 has been a fine gun.
baddarryl is offline  
Old April 14, 2011, 12:07 AM   #3
jmortimer
Junior member
 
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
I've got two 795s and they work every time - no FTF in over 10 years. Now that Remington/Private Equity Co. is involved it may be a whole new story.
jmortimer is offline  
Old April 14, 2011, 08:05 AM   #4
MrWesson
Senior Member
 
Join Date: October 10, 2010
Posts: 298
Sorry you got a lemon but in my experience Marlin makes a solid product.

Remember that firearms are assembled by man and therefor not perfect.
MrWesson is offline  
Old April 14, 2011, 08:37 AM   #5
foghorn leghorn
Senior Member
 
Join Date: January 18, 2010
Location: In a Van down by the River
Posts: 181
perfection

sorry to hear anyone lose confidence in a firearm that has its blueprints patented and is a proven design. The poster mentioned the real culprit, the assembly workers and quality control, or lack thereof.
I think its another example of workers who feel they deserve more than they are receiving in wages or benefits, who take it out on the consumer to punish the employer. Its a disgrace.
I hope that the stuff rolls uphill as the saying goes, and enough complaints make it to Marlin, not just the dealer or local repair center. I have a Glenfield Model 60 that is 45 years old and has been flawless, as is my Remington Nylon 66, and I hope the Ruger 10/22 I bought last year will be.

The automobile is going through similar manifestations when the design cant make it from paper to finished product.
Is there any use in us calling Marlin and protesting their decline, to urge corporate to contact production?
I don't want to lose any more good American products to poor management.
__________________
ΜΟΛΩΝ ΛΑΒΕ
Liberate America... Free the Republic
-NRA Life Member-

Last edited by Shane Tuttle; April 14, 2011 at 01:54 PM. Reason: skirting language filter
foghorn leghorn is offline  
Old April 14, 2011, 11:16 AM   #6
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 4,775
My original letter with the "How are we doing" survey card was sent to Remington on March 25,2011. To date, no response from Remington. There was also a email sent prior to the letter with no response to the email. Guess Marlin/Remington just do not care about responding to customer complaints. As we always said in the concrete business, its easier to keep a customer than to lose that customer and try to get them back. Maybe the older Marlins and Remington's are a quality product, but as far as I'm concerned I'll not buy either NIB.
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08291 seconds with 9 queries