The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 26, 2011, 11:35 PM   #1
308Gunner
Senior Member
 
Join Date: March 22, 2008
Location: NY
Posts: 196
SIG P220 Front Sight

I've got a SIG P220 Euro I've been sitting on for a bit that needs some work, which includes, among other things, a new front sight insert. When I got it, the white insert was missing. Since the old Euros have an integrated front sight, I can't just buy a new one and swap out. I've tried to find just a white insert online with no luck.

My thought has been to use something along the lines of ceramics, putty, etc. to mold out a new one, let it dry, paint it white, and then put it in place of the original insert. My primary concern is if said materials would stand up to recoil force when its fired If anyone's got a suggestion, or thinks the above mentioned idea would work, feel free to input
__________________
‘‘To disarm the people is the best and most effectual way to enslave them.’’

— George Mason
308Gunner is offline  
Old March 27, 2011, 05:44 AM   #2
ogree
Senior Member
 
Join Date: January 18, 2005
Location: Idaho
Posts: 146
One possible method is to use a clear epoxy (5 minute or similar), mix in some white dye and apply it to the front sight.
When it dries, carefully trim off the excess with an exacto knife or razor blade.
If you use some small pieces of sheet metal or rigid plastic on either side of the front sight (held in place with a small clamp) it will help keep the epoxy in place till it sets up.
A little release agent on the sheet metal will prevent it from being glued on to your firearm, I use Johnson's paste wax. Lightly apply the past wax with your finger to the pieces and make sure and degrease the notch/hole for the insert well, acetone works (use something that doesn't leave a residue behind).

You will probably have to experiment a little first to get the mixture correct, too much dye (depending on what it is) and the epoxy won't set up correctly, too little and it won't look right.

Good Luck.
ogree is offline  
Old March 27, 2011, 08:09 AM   #3
grumpa72
Senior Member
 
Join Date: April 5, 2009
Posts: 459
How about a micro-dot application of Testor's Model paint? I bought some at the local hobby shop and all of my guns get a reapplication of this fluorescent paint a couple of times a year.
grumpa72 is offline  
Old March 27, 2011, 02:57 PM   #4
10-96
Senior Member
 
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 2,985
I had an idea sometime back while looking at the Call front sight on my S&W 38/44. Would it be too cost prohibitive to have a jeweler put a spot of gold solder in there? Seriously thinking about having this done on my 19-2.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day)

I'm going to use the words "clip" and "Long Colt" every chance I get. It grinds my gears to see new members attacked when we all know dang good and well what's being refered to.
10-96 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07019 seconds with 9 queries