The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old January 26, 2011, 08:34 AM   #1
j-bird
Member
 
Join Date: June 4, 2007
Posts: 24
Finally added a conversion to my humble collection!

The gun store close to my house here in Fort Worth just also happens to maintain a small inventory of guns for the CAS crowd. Even though I have never participated in cowboy action shooting, I’ve always loved guns of the Old West. I saw this Uberti 1871 Richards-Mason 38 conversion (4-3/4” barrel) and had to have it.

One nagging question sombody can answer for me - and I may just be paranoid; the box clearly says it’s 38 special, but the barrel is stamped “38 Colt & 38 S&W SPEC”. This does mean “normal”, modern 38 special, right? Does that mean it can shoot 38 Colt and 38 special? The instructons simply say to use only the caliber the gun is made for.

I plan to make a nice, wall-mounted display case to show them off - similar to the presentation cases I built and posted on all those years ago (seems like years anyhow).
Attached Images
File Type: jpg CowboyGunsWEB_v2.jpg (124.9 KB, 94 views)
j-bird is offline  
Old January 26, 2011, 08:35 AM   #2
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
Nice...Congrats..

..dont know the answer to your question tho
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old January 26, 2011, 09:04 AM   #3
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,443
regular 38 special likely fits... personally on an open top, I'd only shoot cowboy loads in 38 special... hotter or +p loads will not be nice to your revolver...

I have a one off custom my buddy built on a replica pocket colt that now shoots 32 S&W... I guess I don't like it as much as my top break originals of that era in 32 S&W, but it sure is interesting...

BTW... nice looking guns...
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old January 26, 2011, 10:24 AM   #4
Hardcase
Senior Member
 
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
.38 S&W and .38 Colt are essentially the same round - S&W is a round nosed bullet, Colt is flat.

It is not .38 Special! Your gun is designed for a .361" bullet so, safety precautions aside, accuracy would be less than optimal.

EDIT: OK, it turns out that my reading comprehension skills are pretty terrible. I guess that if it says .38 S&W SPEC, that means .38 Special. But if it chambers a .38 Colt, I would say that my comment about accuracy holds.

You could always slug the barrel, then you'll know for sure.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae
Hardcase is offline  
Old January 26, 2011, 11:13 AM   #5
MJN77
Senior Member
 
Join Date: April 27, 2009
Location: on a hill in West Virginia
Posts: 703
I have one with a 7 1/2 inch barrel.

.38 special and .38 colt cowboy loads or full charge BP loads are what this gun is meant for. No modern +p hot stuff or full metal jackets. Use what it is supposed to eat, and it's a great little gun. By the by, a modern .38 colt is the same as a .38 special, it is just about a 1/4 inch shorter. Original .38 colt cartridges were loaded with a heel based bullet like a .22. The bullet was bigger (.375) than the modern bullets (.357)

Last edited by MJN77; January 26, 2011 at 11:23 AM.
MJN77 is offline  
Old January 26, 2011, 12:02 PM   #6
j-bird
Member
 
Join Date: June 4, 2007
Posts: 24
Thanks Guys. That's what I was thinking. MJN77, I love the finish on that 'ol shoot'n iron! Did you do it yourself?
j-bird is offline  
Old January 26, 2011, 04:27 PM   #7
MJN77
Senior Member
 
Join Date: April 27, 2009
Location: on a hill in West Virginia
Posts: 703
Thanks j-bird. Your's aint so bad either. When I got the revolver, it was a Cimarron "original" finish. It looked pretty bad. The finish had a texture to it. I sanded it smooth, and did a half-a$$ed cold blue job to it. Then oiled it. That is how it turned out. I like it.
MJN77 is offline  
Old January 26, 2011, 05:17 PM   #8
ClemBert
Senior Member
 
Join Date: March 2, 2009
Location: Orlando
Posts: 929
Kewl! I like it!!!
ClemBert is offline  
Old January 27, 2011, 12:48 AM   #9
Ideal Tool
Junior member
 
Join Date: October 6, 2010
Location: Michigan
Posts: 1,080
Hello, j-bird. Perhaps Uberti bored & rifled the barrel for modern .357/.358 dia. bullets? If so, the markings would make sense. You could call them to make sure..or slug the bore. I have a Kirst Konverter cylinder on my early
1970 era Colt re-make of the 1851 navy squareback. Had to use hollow-base bullets, but with light charges of Bullseye, it shoots quite accurate. These guns bring the FUN back into shooting!
Ideal Tool is offline  
Old January 27, 2011, 02:12 PM   #10
Tanker6
Senior Member
 
Join Date: October 21, 2010
Location: Texas
Posts: 193
A little late to the party......

I have two Uberti-made, Taylor's in 1871-72 Open Tops (which are quite similar but with some differences) in the same caliber (with 4 3/4" barrels) I shoot in SASS matches. I shoot 38 special in them. I agree with a prior post that suggests to stay away from the "hot" or +P loads. I shoot "cowboy loads" of 125 gn or 158 gn at 700-800 fps without issue. Accuracy is very good. I cut the center out of a playing card at 7 yards in a side match last month.
Tanker6 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07870 seconds with 10 queries