The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old January 17, 2011, 11:39 PM   #1
BConklin
Senior Member
 
Join Date: December 2, 2010
Posts: 136
I couldn't find an ROA holster that I liked..

so I decided to make one..

I've never done any leatherworking before but I figured it might be something I'd enjoy...I was right!

I found there's a Tandy store not too far from me so I went up there, bought some leather and some tools et voila!

a hand-made-from-scratch, calfskin lined, custom fitted field holster for my favorite gun!

The outer layer is 8 ounce oak tanned cowhide, the inside is 2 ounce calf and the holster is hand stitched throughout. From tracing and modifying a template on manila folders to burnishing the edges on the finished holster represents a whole bunch of hours of work but I thoroughly enjoyed the process.

Though there are a few mistakes I'm quite happy with the outcome... especially since it's my first attempt. It's not bad looking at all. It's quite rigid and fits the gun perfectly and I think it'll do the job nicely.

I went a little overboard buying leather so I plan to keep busy making several more holsters this winter. Come spring, maybe I'll have a custom holster for every pistol I own.

Here's some pics.



BConklin is offline  
Old January 17, 2011, 11:51 PM   #2
Hardcase
Senior Member
 
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,901
Give yourself a hearty pat on the back because that is a fine job!
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae
Hardcase is offline  
Old January 18, 2011, 12:24 AM   #3
denster
Senior Member
 
Join Date: April 24, 2010
Location: Ohio
Posts: 464
For a first holster that is phenominal. I make holsters as a retirement business and I am impressed.
denster is offline  
Old January 18, 2011, 07:38 AM   #4
Roaddog
Senior Member
 
Join Date: July 16, 2010
Location: East central Minnesota
Posts: 128
Ya did a very nice job. I would of never known that was your first if you wouldn't of said so. Don't stop now.
Roaddog is offline  
Old January 18, 2011, 10:55 AM   #5
napp
Senior Member
 
Join Date: November 30, 2010
Location: Georgia
Posts: 152
Nice work. I especially like the color you chose. The contrast between the grips, the stainless pistol, and the holster makes for a perfect combination.
__________________
napp
napp is offline  
Old January 18, 2011, 11:49 AM   #6
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,539
That's a first attempt? Good God, man, that is incredible! The only mistake I see is it was a little wide at the top, but your long backstitch to make it work actually looks like an intentional decorative touch. I know people who have been doing this for forty years, myself included, who certainly couldn't do any better. Congratulations!
__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Old January 18, 2011, 11:55 AM   #7
aarondhgraham
Senior Member
 
Join Date: December 1, 2009
Location: Stillwater, OKlahoma
Posts: 7,003
Nice job,,, Very nice indeed,,,,,

Especially for your first holster ever.

Aarond
__________________
Caje: The coward dies a thousand times, the brave only once.
Kirby: That's about all it takes, ain't it?
Combat: "A Silent Cry"
Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time)
aarondhgraham is offline  
Old January 18, 2011, 12:27 PM   #8
BConklin
Senior Member
 
Join Date: December 2, 2010
Posts: 136
Thanks Folks!

JBar - that's a good example of a small mistake at the beginning carrying all the way to the end. In this case, apparently I didn't trace the gun outline carefully enough.

OTOH - even with the excess width AND a piece of 10 ounce leather placed in between the front and back there as a filler, there's just enough room for the trigger guard. It pushed the holster apart so much the glue on the filler gave out on the inside edge. The long back stitch was added to hold the filler in place better - and to add strength to the holster at a stress point

Next time - more accuracy in tracing the outline - and more filler at the trigger guard?
BConklin is offline  
Old January 18, 2011, 12:59 PM   #9
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
WOW, just WOW, your first one, WOW.
madcratebuilder is offline  
Old January 18, 2011, 01:06 PM   #10
Jimmy10mm
Senior Member
 
Join Date: June 16, 2010
Location: Greenacres, FL
Posts: 906
If you had posted that you had bought a professionally made custom holster I would have believed it without question from looking at the photos. A really fine job regardless of your "mistake". No one would know that if you hadn't told us.
__________________
Quote:
"the 380 in your pocket is better than the 45 you left at home." posted by, mavracer
Jimmy10mm is offline  
Old January 18, 2011, 01:09 PM   #11
swcr
Member
 
Join Date: December 31, 2009
Location: Sedro-Woolley, WA
Posts: 64
Great job. I wish my first holster had looked anywhere near that good.
swcr is offline  
Old January 19, 2011, 11:05 PM   #12
BConklin
Senior Member
 
Join Date: December 2, 2010
Posts: 136
showed it over on a leatherworker's forum and they wanted to see the edge of the main seam.

So I took these pics...



They suggested the holster needed edge burnishing.

All sorts of different methods are recommended there - but I used files, sandpaper, spit, beeswax, a dremel tool with a sanding drum and a felt wheel, an old piece of turned ivory and plenty of elbow grease.

After that the whole holster was lightly sprayed with a sealer (Mop & Glow and water) then lightly waxed with Kiwi neutral and buffed with flannel..

and here's the finished product...



BConklin is offline  
Old January 19, 2011, 11:28 PM   #13
bedbugbilly
Senior Member
 
Join Date: November 19, 2009
Posts: 2,154
WOW!!! You did a fantastic job on the holster . . . and you should be very, VERY proud of your final result. She's a nice one! I make holsters and accouterments and I'll tell you, if that is your first holster, you did some excellent craftsmanship on it!

If you haven't already run across it - hit the link below and it will take you to the leatherworking forum over at cascity - lots of good information there.

http://www.cascity.com/forumhall/ind...oard,57.0.html

Now that you've made your first one - I can tell you that it is "habit forming" - just like shooting SA. Once you make a holster for everyone of your shootin' irons . . you'll make another holster and then have to buy another gun to fit it . . . and it just snowballs from there!

Thanks for sharing your story and photos - good luck with the leatherwork - am looking forward to seeing other photos of your work!!!
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63
bedbugbilly is online now  
Old January 19, 2011, 11:29 PM   #14
jimbob86
Senior Member
 
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 6,702
Very Nice, Very Nice!
__________________
TheGolden Rule of Tool Use: "If you don't know what you are doing, DON'T."

http://nefirearm.com/
jimbob86 is offline  
Old January 20, 2011, 09:33 AM   #15
BConklin
Senior Member
 
Join Date: December 2, 2010
Posts: 136
Thanks guys - it did turn out much better than I expected.

I had a notion I was going to like leatherworking so I bought a pile of leather even before I got going on this one. I have plenty leftover to keep me busy and I already have some cool ideas I want to try on my next project.
BConklin is offline  
Old January 20, 2011, 12:14 PM   #16
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,844
Beautiful work there BConklin. You should be very proud of the holster.

FM
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old January 20, 2011, 10:46 PM   #17
Dave Cole
Member
 
Join Date: August 16, 2009
Location: Satellite Beach,Fl.
Posts: 55
I would have to agree with all the others.I am a holster maker and that is an excellant job even for a seasoned vet.Glad you cleaned up the edge,as it makes a world of difference.Dave
Dave Cole is offline  
Old January 20, 2011, 10:56 PM   #18
Bill Akins
Senior Member
 
Join Date: August 28, 2007
Location: Hudson, Florida
Posts: 1,030
Beautiful job! You have some nice leather making skills. I would never have guessed that was homemade. It looks factory made. Probably is better since you made it for yourself and took pains with it.
Bill Akins is offline  
Old January 21, 2011, 10:25 AM   #19
BConklin
Senior Member
 
Join Date: December 2, 2010
Posts: 136
Thanks again folks!

I was up till 1 this morning laying out the template for my next project - another hunter-style holster for a bull barrel Ruger Mark II
BConklin is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11406 seconds with 9 queries