The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old October 3, 2010, 02:52 PM   #1
RINKY
Junior Member
 
Join Date: October 3, 2010
Posts: 1
Mossberg 505 .410 feed jams

I just got a new Mossberg 505 .410 pump and tried it this AM.
It will not feed from the mag.
I tried 2.5" shells first and switched to 3" to see if that was the problem.
It occasionally feeds 2 rounds into the carrier and sometimes it works normally.
MOST jam.
When it does put it directly in the carrier, it will jam (1/3 WAY INTO CHAMBER) on entering the chamber but not all the time.
Tried operating fast, slow and in between.

Any ideas or is this a warranty item and stop messing with it?

Thanks for any info.
Are the .410 Mossbergs finicky?

Thx

RINKY is offline  
Old October 3, 2010, 03:54 PM   #2
nogo
Senior Member
 
Join Date: September 7, 2009
Location: central texas
Posts: 211
I've had this problem with two other new Mossberg pumps. The problem was caused by the two shell interrupters having sharp points that dragged on the case heads--thus tying things up.

Dis-asemble, clean thoroughly, and break the edge of the interrupter ends and then polish same. You can do all this with medium coarse or coarse grit sandpaper and polish with fine grit. Just make sure the ends do not snag on the case heads.
nogo is offline  
Old December 31, 2010, 01:51 PM   #3
SteppinR
Junior Member
 
Join Date: December 31, 2010
Posts: 3
Rinky,

My Mossberg .410 has been the same from Day 1 (purchased new approx 2 years ago), very annoying to say the least.

Did you try nogo's idea and did it fix the problem? Thanks.
__________________
SR
SteppinR is offline  
Old December 31, 2010, 08:54 PM   #4
Prof Young
Senior Member
 
Join Date: August 21, 2007
Posts: 656
Same here

410 lovers:
My Mossberg 500 410 is probably my favorite gun. Not sure why. Anyway, I had the same problems. Finally sent it to Mossberg. They fixed it free and it has functioned flawlessly since. Granted one shouldn't have to send a new gun in for repairs, but . . . it is what it is.

Live well, be safe.
Prof Young
Prof Young is offline  
Old January 1, 2011, 09:57 AM   #5
SteppinR
Junior Member
 
Join Date: December 31, 2010
Posts: 3
Thanks, Prof.

I love my Mossberg .410 too. I wonder if Mossberg will be willing to try to fix it even though it's 2 years old? I'll contact them. I did contact them when I first got the .410 but doubt they kept a record of my complaint.

In any case, the only reason I own the gun is for protection; it doesn't make sense to have an unpredictable and unreliable weapon for protection. I hope Mossberg will be able to help.

Happy New Year.
__________________
SR
SteppinR is offline  
Old January 1, 2011, 01:22 PM   #6
triggerman770
Senior Member
 
Join Date: August 9, 2009
Location: Metro Atlanta Area
Posts: 125
I had one come in for a customer that bought thru me at Gallery of Guns, which came with thier lifetime replacement warranty,. customer called me, told him to bring it back to me. called my rep,new gun showed up next day, custmer came by, left happy, old one went back. no fuss, no muss no bother, no wait.
__________________
Small Arms Restoration, Inc.
smallarmsrestoration.net
Proud member of Georgia Carry.org
www.georgiacarry.org
triggerman770 is offline  
Old January 1, 2011, 01:58 PM   #7
SteppinR
Junior Member
 
Join Date: December 31, 2010
Posts: 3
Triggerman:

I sent it to Mossberg for repair.

In the meantime, I just bookmarked your site (for possibly selling a pistol).

Thanks.
__________________
SR

Last edited by SteppinR; January 3, 2011 at 08:26 PM.
SteppinR is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07000 seconds with 9 queries