The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 17, 2010, 11:20 AM   #1
GAR700
Senior Member
 
Join Date: September 22, 2008
Location: East of the Crest, Oregon
Posts: 178
Springfield 1911 trigger work

I am intersted in having some trigger work done on my Springfield Mil Spec. I am hoping there is a local gunsmith that is capable of doing a quality job. If any of you in or familiar with Central Oregon could help me out, I would appreciate it. If not, what are my other options.
Thanks,
GAR
GAR700 is offline  
Old December 17, 2010, 06:49 PM   #2
SauerGrapes
Senior Member
 
Join Date: March 22, 2009
Location: S.E.PA.
Posts: 682
I've run into the same problem. Depending on where you shoot, you may run into somebody at your club\range that is very good with the 1911 platform.
This was what I did, since we have many bullseye shooters at my club and some of them are super 1911 mechanics. Quite a few do their own trigger work and such.
Maybe I'm just lucky. Just a thought. Maybe you can asked around your favorite shooting place and find a smith that comes recommended.

Good luck,
Sauer....Grapes
SauerGrapes is offline  
Old December 18, 2010, 01:07 AM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,352
A trigger job on a 1911 style pistol isn't difficult. Just changing the springs will help.
However, polish(not files or stones) all the mating surfaces on the sear and hammer, polish the sides of the trigger where it runs in the frame and clip a 1/4 turn off the mainspring. You may need to take a bit more off the mainspring, but start with a 1/4 turn.
You may want to think about changing the sights too.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old December 18, 2010, 01:22 AM   #4
triggerman770
Senior Member
 
Join Date: August 9, 2009
Location: Metro Atlanta Area
Posts: 125
Gunsmith

go to www.gunsmiths.com and put in your zip code and how far you will travel and it should pull some up.
__________________
Small Arms Restoration, Inc.
smallarmsrestoration.net
Proud member of Georgia Carry.org
www.georgiacarry.org
triggerman770 is offline  
Old December 21, 2010, 11:17 AM   #5
GAR700
Senior Member
 
Join Date: September 22, 2008
Location: East of the Crest, Oregon
Posts: 178
Thanks for the input.
I am growing weary of packing a gun that I can't shoot as accurately as I would like. I am sure it is not the fault of the gun, but the fact remains that I am much more accurate with my other handguns. I would like to try a different trigger setup and perhaps different sights.
GAR
GAR700 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06954 seconds with 9 queries