The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools
Old December 19, 2010, 12:17 AM   #1
ethan95
Senior Member
 
Join Date: September 6, 2010
Location: Withheld
Posts: 166
Inspecting Lever Action Bore

This may (and probably will) come off as a stupid question to most, but here it goes. How does one go about inspecting the bore of a lever action rifle? Granted there's really only one way: Clear firearm, check firearm, double check firearm, and then, look down the barrel. What would most folk at my local guns store think about this?

Mods: accidentally placed this in the wrong section, please feel free to move it.
__________________
Μολὼν λαβέ

Last edited by ethan95; December 19, 2010 at 12:28 AM.
ethan95 is offline  
Old December 19, 2010, 12:28 AM   #2
Ideal Tool
Junior member
 
Join Date: October 6, 2010
Location: Michigan
Posts: 1,080
Hello.ethan95..Unless you have access to a bore-scope, there is no other way, unless it's a Marlin & you pull the bolt..probably not in gunshop though. I can't see it being any different than with an auto loader or pump..If anything, owner should at least lend you a bore light, if he wants a sale.
Ideal Tool is offline  
Old December 19, 2010, 07:53 AM   #3
Radar
Senior Member
 
Join Date: October 20, 2009
Posts: 117
The way my father taught me...
Be sure the rifle is unloaded. Open the action, and place a piece of white paper behind the breach and angled out of the action. Turn it toward a light source and look down the barrel-simple as that.
Radar is offline  
Old December 19, 2010, 08:12 AM   #4
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,753
You can get a small cheap led key chain flashlight at most convenience stores that works well or you could buy a real bore light.
Hawg is offline  
Old December 19, 2010, 09:19 AM   #5
Que
Senior Member
 
Join Date: January 20, 2008
Location: Georgia
Posts: 883
There are a number of flashlights that have the light part on a flexible cable. The best one that I have found is made by Coast. Lowes sold them for $15 and some of the local gun shops were selling them for $30. Merely open the bolt and put the light in through the ejection port up into the chamber. If the light is too strong angle it away diverting some of the beam. I always carry a bore light in my glovebox. A piece of white paper will also work, but may be more difficult with a longer barrel. Even a fingernail can help if you can fit it.
Que is offline  
Old December 19, 2010, 09:59 AM   #6
overland
Senior Member
 
Join Date: November 30, 2009
Location: Outback of Michigan
Posts: 244
Take the lever off and pull out the bolt and ejector then you can see down the barrel from the chamber. It takes less than a minute to do. Any decent gun shop owner should let you do it.

Last edited by overland; December 19, 2010 at 10:11 AM.
overland is offline  
Reply

Tags
dumb , inspecting , question , silly , stupid

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06483 seconds with 9 queries