The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 10, 2010, 12:33 AM   #1
riggins_83
Senior Member
 
Join Date: January 19, 2009
Location: Wherever I may roam
Posts: 1,483
Worst gunsmithing accident?

What's the worst thing that's happened to you while working on a firearm? I'm not talking about NDs... just general accidents. The file slipped, the screwdriver slipped, the drill went too deep, etc.

For me it was while working on an AR15 when I first got into firearms. I had a rail installed on the free floated handguard. Decided to use loctite on the screws attaching it. I used too much and put the rifle back in the safe too fast. The loctite made its way down into the action and bonded the bolt and the receiver. I was able to tap them apart after an hour of work.. but still ended up replacing the upper. Nice little $600 mistake. To this day my wife still gives me trouble if she sees me using loctite.. on anything.
__________________
l've heard police work is dangerous. Yes, that's why l carry a big gun. Couldn't it go off accidentally? l used to have that problem. What did you do about it?
l just think about baseball. -Leslie Nielsen
riggins_83 is offline  
Old December 10, 2010, 01:49 AM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,461
To me, launched the bolt spring for a Colt Trooper duty pistol into a black hole about 1 hour before the owner was supposed to pick it up as his duty sidearm. Let's just say he was not happy.

BUT, I watched as a smith in the shop reassembled a brand new, unfired Python after doing a trigger job and accidentally ran a screwdriver across the sideplate. That owner was not happy, either, and that one cost a lot more to fix. BTW, that accident led up to how I got my second blued Python.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old December 10, 2010, 01:50 AM   #3
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 5,386
One of the others forgot to put release agent on the metal when he glass bedded the rifle.That was not his first mistake and they asked him to leave !
The worst thing that happened to me was while buffing a revolver cylinder .The wheel caught the cyinder and threw it to the floor .That's when I learned how soft the steel was .A major effort was needed to restore two collapsed chambers.
__________________
And Watson , bring your revolver !
mete is offline  
Old December 10, 2010, 10:31 AM   #4
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,456
Happened to me a couple times. Forgetting to check the sights and other parts to make sure they are steel and will attract a magnet. Had to replace the sights on a couple Ruger revolvers because the salts ate the sights when I put them in the bluing tank.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old December 10, 2010, 10:45 AM   #5
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,352
Trying to take off the fancy trigger guard on a pre-WWI Mauser, and realizing too late (2 screwdrivers and a buggered screw late) that the screw was decorative and riveted on the back.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old December 10, 2010, 01:45 PM   #6
k in AR
Senior Member
 
Join Date: October 12, 1999
Location: Arkansas USA
Posts: 434
After market trigger for a Ruger M77 and filed the safety just a tad too much by using a course stone trying to rush the job....
k in AR is offline  
Old December 11, 2010, 12:19 PM   #7
DT Guy
Senior Member
 
Join Date: February 4, 2001
Posts: 701
Ran a Kimber slide into the mill for a Bo-Mar cut, and realized, after a minute or two of feeding, that I'd forgotten to do the final tighten on the vise.

It made an ....'interesting'.... slide cut, as the slide slipped down and away from the cutter.

Thankfully, it was my own part, and only cost me $$ and some pride, rather than any reputation or offerings of physical violence.


Larry
__________________
He who fights and runs away had better run pretty damn fast.

Government, Anarchy and Chaos
DT Guy is offline  
Old December 11, 2010, 01:48 PM   #8
guncrank
Senior Member
 
Join Date: July 15, 2006
Location: Fern Creek ,KY and Metro Louisville at large
Posts: 319
I did the same with a Llama slide . The table clamp came loose and dovetail was to wide.
I cut the little peice off a weld and built up, machined down
Customer was ok with it ,
__________________
CW Shooters Supply Inc
1-866-217-5990
Machine Shop and Finishing Services to the trade and public
guncrank is offline  
Old December 11, 2010, 06:06 PM   #9
roklok
Senior Member
 
Join Date: October 20, 2008
Location: Fort Yukon, Alaska
Posts: 696
My worst ? Just happened. Spent over an hour typing up a how-to home gunsmithing project to post here, went to submit new thread, TFL asked for my login information again........entered it......my post was GONE !! Can't recover it, I am P@##@d.

I am going to go work on some guns to cool down.
roklok is offline  
Old December 11, 2010, 10:40 PM   #10
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,516
Not exactly a normal gunsmith occurence, but I once went to take the buffer spring out of a .50 M2. It got away and the cap went through the arms room window and screen, flew some 50 feet, and bounced off the wall of the adjacent company's mess hall. Darned things are almost as dangerous at the back as at the front.

Didn't happen to me but almost cost a friend his eyesight. He had the habit when bluing 1911's of just giving the magazine a quick polish and tossing it in the bluing tank. He did that with a BHP magazine, not knowing or forgetting that the follower is aluminum and that bluing salts dissolve aluminum. The follower let go and it and a handful of hot caustic salts came up in my friend's face, barely missing his eyes. (No goggles or face shield, of course, those were for sissies!)

Jim
__________________
Jim K
James K is offline  
Old December 11, 2010, 10:51 PM   #11
phydaux
Member
 
Join Date: October 31, 2010
Posts: 65
Quote:
No goggles or face shield, of course, those were for sissies!
Man, that hits close to home for me.

My ex-father-in-law was a welder. He didn't like to wear his mask until after he'd started the bead. Then one day he caught a spark right in his eye. Permenent double vision.

He's retired now.
phydaux is offline  
Old December 12, 2010, 06:17 AM   #12
1911rocks
Senior Member
 
Join Date: September 9, 2006
Posts: 424
What did I just do?

1988 I was chambering a I think it was either a Douglas or Shilen Barrel for 308, or so I thought, actually I realized, after cutting and crowning the barrel to 24", that I had grabbed a 300 Win Mag ream. That sucks. It was a customer's build. I was tempted to try and talk him into a shorter barrel . Instead, I ate it. That was a first and last mistake like that.
1911rocks is offline  
Old December 12, 2010, 08:24 PM   #13
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,825
One I always remember was a re-barrel job on a Python.

I had everything locked up and ready to break the barrel loose, when as I always did, I just put my hands in my pockets, stopped and looked everything over.
This is always a smart move to insure you don't have something backward or improperly set up.
As I reached for the handle on the frame wrench, out of the corner of my eye, I saw another Python in the ready rack.

I had the WRONG Python ready to pop the barrel off. It was in for work on the action. I just got careless and grabbed the wrong gun from the repair rack.
I almost always made sure to read the tag before doing anything, but I forgot it this one time.
After that there was no more "almost always".
Dfariswheel is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09876 seconds with 9 queries