The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 1, 2010, 11:24 AM   #1
dussandr
Member
 
Join Date: March 15, 2009
Posts: 36
Stainless blackening/bluing

I did a search on 'blacken stainless' and read the resulting threads. I am curious if anyone has any pics of stainless that has been refinished this way? Not coatings, but via chemical process.
Thanks in advance.
__________________
Taste the wares, Email.
dussandr is offline  
Old December 1, 2010, 09:09 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,177
Basically, "bluing", "browning" and "blackening" are simply refined rust, and the whole intent of stainless steel is that it is highly rust resistant. I have seen several products that do work to chemically blacken stainless steel (not paints) but the gunshop products I have tried don't work any better than cold blue works on regular steel. The darkening lasts for a while but will rub right off in a short time.

Factories do blue stainless steel barrels, but seem to keep the process a closely guarded secret. The problem has been gotten around in other ways, among them anodizing (yes, it works with steel as well as with aluminum), and plating the steel with iron, then bluing the iron. Neither is really a DIY type of operation.

Jim
__________________
Jim K
James K is online now  
Old December 2, 2010, 10:18 AM   #3
George R
Senior Member
 
Join Date: December 17, 2004
Location: Boca Raton, FL
Posts: 151
Hot Blue Stainless Steel

I hot blue stainless, and I think Ford's is now doing it. Not a big secret. The salts are available from DuLite and Brownells.
George R is offline  
Old December 2, 2010, 05:04 PM   #4
Buzzard Bait
Senior Member
 
Join Date: June 25, 2008
Location: Republic of Texas
Posts: 333
rem 700 magnum calibers

I think factory Remington 700 rifles in magnum calibers have stainless barrels but are in some way blued to match the rest of the rifle
bb
Buzzard Bait is offline  
Old December 3, 2010, 01:01 PM   #5
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,195
Brownells Oxynate 84. It is for bluing stainless and cast iron. But it is a hot bluing method, so you need to be equipped for hot bluing to use it.

I've got a gallon of cold black for stainless, but a kind of charcoal gray is all I ever get out of it. Abrasive blasting helps, but on polished stainless it is pretty disappointing. I got it for coloring screws to match a panel originally, but wasn't pleased by the results.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Old December 3, 2010, 01:50 PM   #6
rattletrap1970
Senior Member
 
Join Date: October 13, 2009
Location: Torrington, CT. USA
Posts: 299
There is a place in New Britain CT. Called "Black oxide". I had them do an AMT Hardballer Longslide. They did a great job and it lasted a long time.
rattletrap1970 is offline  
Old December 3, 2010, 02:13 PM   #7
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,177
Black chrome is another method, but it is plating, not a chemical treatment.

Jim
__________________
Jim K
James K is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08225 seconds with 9 queries