The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 9, 2010, 10:41 AM   #1
rgarman
Junior Member
 
Join Date: October 22, 2010
Location: Pekin,Il.
Posts: 13
Trail Boss in .357

I loaded 5gr. of Trail Boss under 122gr. 9mm lead trunicated cone bullets and also 158gr LSWC. I test fired 10 of each over the chrony and got an ave. velocity of 855 for the 122s and 720 for the 158s. The 122s were very accurate, the 158s not so good. I then went up to 5.9grs of Trail Boss under the same 2 bullets. Test firing 10 rds of each came up with 609ave. velocity for the 9mms and 774 for the 158s. Does this make sense to anyone? Same primers, same brass, same day. I can't figure out why the 122s were over 200 fps slower with 1grain more powder,
rgarman is offline  
Old November 9, 2010, 10:55 AM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,406
Two possibilities. One is that you were too close to the chronograph. I always use 15 feet now. Too many folks trying to make 6 feet work get false highs or lows from muzzle blast.

Second possibility is that with the case more full, the primer developed enough pressure to unseat the bullet before the powder burn caught up, so it was like shooting in a bigger case and got lower peak pressure. Usually the velocities are inconsistent when that's happening.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old November 9, 2010, 11:04 AM   #3
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,791
Do you know that those loads are WAY over max published by Hodgdon/IMR?

They show 4.2gr as max load under the 158gr LSWC.


I don't know the case capacity and all that right off but I suspect that your problem may that you are compressing those loads.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old November 9, 2010, 11:07 AM   #4
mikejonestkd
Senior Member
 
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 2,762
http://www.imrpowder.com/data/handgu...ss-feb2005.php


way over charged....
__________________
You are the bows from which your children as living arrows are sent forth.
mikejonestkd is offline  
Old November 9, 2010, 11:23 AM   #5
rgarman
Junior Member
 
Join Date: October 22, 2010
Location: Pekin,Il.
Posts: 13
I'll check my records, I was going by memory and I had also loaded some .44mag with Trail Boss so I may have quoted the wrong powder weight on the .357s. I know that even the 158gr. bullets did not compress the powder.
rgarman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08491 seconds with 9 queries