The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 1, 2008, 11:46 AM   #1
MartyV
Junior Member
 
Join Date: April 1, 2008
Posts: 2
Once fired brass

Seems like the availability of once fired 38 Special & 357 Magnum brass has dried up. Does anyone have a source whose brass is not backordered?
MartyV is offline  
Old April 1, 2008, 12:40 PM   #2
Grandpa Shooter
Senior Member
 
Join Date: November 13, 2007
Posts: 140
When you have more time in here, you could advertise what you want in the Trading Post. There are always people on here selling.
__________________
Old enough to know better and way too old to care!
Grandpa Shooter is offline  
Old April 1, 2008, 01:34 PM   #3
byronw999
Member
 
Join Date: October 31, 2007
Location: Grand Prairie, Texas
Posts: 46
I've bought brass from these folks and gotten good service.. Looks like they have both in stock..

http://www.brassmanbrass.com/index.html
byronw999 is offline  
Old April 1, 2008, 08:19 PM   #4
dogfood
Senior Member
 
Join Date: October 17, 2004
Location: Southwestern OH
Posts: 222
Go to the Gun Show section of the forums and hit the Accessories page. Search for Silentarmy's latest post. PM him for pricing and availability of what you want (his inventory changes often). I just bought 10mm brass from him and I'm a happy customer.

dogfood
dogfood is offline  
Old April 2, 2008, 06:13 PM   #5
jhansman
Senior Member
 
Join Date: June 17, 2007
Posts: 624
Or, just invest in new brass, treat it right, and it will last you longer than you might think. I bought 500 pieces of Starline years ago, and still have most of it untouched. The first 100 pieces of it are still in excellent conditiion, but then I don't shoot zombie killer loads out of my GP100 (but I could!).
__________________
Blessed is the man who has nothing to say, and cannot be compelled to say it.
jhansman is offline  
Old April 2, 2008, 07:11 PM   #6
dogfood
Senior Member
 
Join Date: October 17, 2004
Location: Southwestern OH
Posts: 222
jhansman:

Good advice, especially for revolver shooters - and I would go with new brass, if it was brass I could recover. For some reason, I was thinking along the lines of match shooters (steel challenge, practical pistol, cowboy) where they aren't able (or aren't allowed) to recover their brass. If you're going to shoot it once and leave it, used brass is worth considering.

dogfood
dogfood is offline  
Old April 2, 2008, 07:49 PM   #7
GP100man
Senior Member
 
Join Date: August 1, 2007
Location: Tabor City , NC.
Posts: 1,932
once fired????

i dont buy once fired as once fired ,i buy it as used brass.not to imply anything on sellers ,heck i`ve sold brass too.
but ive almost stopped buying used brass because of the cost ,then shippin????
i put a couple hundred on my midway orders ,it builds up qwik!!!
buy new starline ,you`ll never regret it .
used brass i load for plinkin
new brass is loaded for accuracy work & huntin rounds

GP100man##

Last edited by GP100man; April 2, 2008 at 07:50 PM. Reason: spelin
GP100man is offline  
Old April 2, 2008, 09:16 PM   #8
long rider
Senior Member
 
Join Date: January 8, 2008
Posts: 669
Marty v, i have a big old coffie can full of 357/38spl
i do not need them duw to the fact i dont have a
357 or 38 so they are takeing up space.
If you want them i will make a count of how much
brass there is.
__________________
Sod Buster Tried To Pull On Willson.
long rider is offline  
Old April 19, 2008, 06:11 PM   #9
drack
Junior Member
 
Join Date: March 4, 2008
Posts: 7
Once fired brass

You can find what you need at Blue Star Cartridge and Brass......I just left that site and they have decent prices and their service is "spot-on". If you try their site' you'll find that you must order by phone with a major credit card. They have a large selection of brass, projecticles and other stuff. If you load rifle ammo.......they are the only show in town that offers 150 gr round nose bullets in 270 cal. Good Luck Pal...........Drack in Fl
drack is offline  
Old April 19, 2008, 07:18 PM   #10
The Lovemaster
Senior Member
 
Join Date: December 29, 2007
Location: Arizona
Posts: 416
Hi Marty, hope the brass worked out okay for you.

For anyone that needs it, I have plenty of brass, including .38 and .357.
The Lovemaster is offline  
Old April 19, 2008, 10:51 PM   #11
Prince55
Senior Member
 
Join Date: June 22, 2007
Posts: 459
Brass Supply---

The Lovemaster---Great to buy from and deal with.
Prince55 is offline  
Old April 20, 2008, 12:45 AM   #12
gandog56
Senior Member
 
Join Date: May 31, 2006
Location: Mobile, Alabama
Posts: 964
If you've got anything to trade, go to www.ammobrasstrader.com
__________________
Some people think I'm paranoid because I have guns. If I have guns, what do I have to be paranoid about?
gandog56 is offline  
Old April 20, 2008, 02:22 AM   #13
scsov509
Senior Member
 
Join Date: November 22, 2006
Posts: 758
Quote:
The Lovemaster---Great to buy from and deal with.
+1
scsov509 is offline  
Old September 10, 2010, 12:38 AM   #14
RemSev
Junior Member
 
Join Date: September 10, 2010
Posts: 2
Brass for Sale

I have thousands of once fired pistol brass for sale. Unsized and unpolished. See prices below. Email me if you are interested.

9mm per 500- $25
38sp (Win. Nickel) per 500- 35
357mag (Win. Nickel) per 500- 35

Price does not include shipping.
RemSev is offline  
Old September 14, 2010, 08:31 PM   #15
bamacisa
Member
 
Join Date: February 13, 2008
Posts: 49
Gun broker has it listed for sale under 38 brass.
bamacisa is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09706 seconds with 9 queries