The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old August 30, 2010, 01:11 AM   #1
trg42wraglefragle
Senior Member
 
Join Date: April 21, 2008
Location: new zealand
Posts: 837
Rings and Base for new scope

Hi all.
I'm going to get a new scope for my Tikka T3, the current one is a 25mm tube but i'm going to get a 30mm tube, so i'm going to need new rings and bases.

My question is what is better one or two piece bases? And what is a good brand to get? I don't want cheapo stuff but don't wan't to spend mega bucks to.
I've been looking at Leupold Mark 4 rings and a one piece Base, am I on the right path?

Thank you.

Oh by the way, the scope will be a Bushnell elite 4200 6-24x50, what size rings will I need? (please don't tell me I don't need a 50mm eyepiece ).

Thanks
trg42wraglefragle is offline  
Old August 30, 2010, 02:11 PM   #2
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,324
One piece might be better aligned, especially on the lower priced ones.
But they might not have enough distance between the rings for the scope.
You'll have to carefully measure the scope to see.
Ditto for the size rings.
If you haven't bought the scope, best go to the manufacturers website for the specs.
g.willikers is online now  
Old September 4, 2010, 03:31 PM   #3
Jack O'Conner
Senior Member
 
Join Date: July 11, 2005
Location: Lancaster County, Pennsylvania
Posts: 1,510
Two piece base provides the most latitude in scope placement for proper eye relief. I'm a big fan of Millett products.

Jack
__________________
Fire up the grill! Deer hunting IS NOT catch and release.
Jack O'Conner is offline  
Old September 4, 2010, 10:36 PM   #4
guf
Member
 
Join Date: May 25, 2010
Posts: 35
rings and base

Burris Signature rings, med. hgt. Either one or two piece base will be fine. Use extension rings if necessary for scope positioning.
guf is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06053 seconds with 9 queries