The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 18, 2010, 11:39 AM   #1
nobearsyet
Junior Member
 
Join Date: July 16, 2010
Location: oklahoma
Posts: 8
springfield set trigger

Ok I posted this in the blackpowder thread and only got 1 response so please bear with me as I am reposting my question here I am building a trapdoor springfield for BPCR competition and am wanting to use a set trigger I know pedersoli makes a couple trapdoor variants with set triggers and am planning on using pedersoli parts but not sure which ones I need to install in my original springfield assemblies can anyone tell me which parts I need to replace? And which tumbler (as there are 2 from SA) etc I need to use as I probably have enough trigger and lock parts to do at least 3 guns and knoew I have both kinds. Also would it be possible (without being a master gunsmith moind you) to use a standard muzzlelloader double set trigger with the springfield lock? Any and all help will be appreciated.
nobearsyet is offline  
Old July 19, 2010, 03:21 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,187
I can't say I've ever had a trapdoor apart, but I would ask Pedersoli first if their parts fit the original lock? There are a bunch of Trapdoor links, here. One of them may have the answers you seek?
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Patron Member
Unclenick is offline  
Old July 20, 2010, 10:44 PM   #3
nobearsyet
Junior Member
 
Join Date: July 16, 2010
Location: oklahoma
Posts: 8
I tried that link and asked a bunch of guys over there and got no response other than to try some adjustable tumbler thing to improve pull but I am kind of set on a set trigger (pun intended) either single or double. Has anyone tried putting the pedersolli lock parts in a springfield lock? What parts are different between a set trigger lock and a regular lock I know with muzzleloaders you have to add a fly but can find no listing of one in any of the pefersolli schematics I've found. And all of theplaces I've looked all of the part numbers are different for all of the pedersolli trapdoor guns so no luck there. Can anyone direct me in the right direction?
nobearsyet is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06182 seconds with 9 queries