The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old May 26, 2010, 11:07 AM   #1
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Faux ivory grips redux.

I've been thinking about getting a set of these for my Uberti made 1858 Remington replica. I've checked in on here for suppliers & have found 3 that are interesting to me as I don't want to spend more than about $50.00 out the door.
The question is for those that have already done this.
What was the process like? Good, bad, or indifferent?
I'm looking at one vendor who has several diferent pre-made grips & al you do is order by model, and another that does a fair amount of custom options, like medallions & so on. What's the opiniin of the tribe on my best bet for a good fitting set out of the box?
wogpotter is offline  
Old May 26, 2010, 12:19 PM   #2
Dino.
Junior member
 
Join Date: November 2, 2006
Posts: 908
I just bought a pair of faux ivory grips for my 1849 from here ...
http://westernandwildlifewonders.com...a14790be8319ba

Once I placed my order, I received an email requesting that I send them a tracing of the grip frame which concerned me a little. After talking to "Don" on the phone, he explained that he had over 90 molds for the 1849 and that "no two grips are alike". My first thought was "then how the heck does the manufacture sell replacement grips, let alone all the after-market offerings?"

Long story short, I agreed to send him a tracing, tore the gun down, made him an exact template, and sent it off in the mail. A couple days later, he called just to let me know he received it and told me that it would take a couple weeks (which I expected).

In the meantime, I had ordered a new backstrap from the manufacture.
It came in a couple days after my conversation with "Don" about the grips.
When I swapped out the backstrap, the screws matched up okay but the backstrap didn't match up properly to the frame.

IMO, this only confirmed what "Don" had told me when he said "no two grips are the same". So, if you do order from a company that claims to have grips for your gun and they do not ask you for a tracing, you may have to do some fitting once you get them. Then again, it may not be an issue for your 1858. But it may be worth asking.
Dino. is offline  
Old May 26, 2010, 01:01 PM   #3
Hardcase
Senior Member
 
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,901
Wog, I suspect that one of the vendors you're considering is Tombstone.

I ordered a set of grips from him earlier this year and sent a tracing of the factory grips for the same reason that Dino mentioned. I'm very happy with the end product - a faux ivory set. I had to do a bit of finish sanding, which I had expected, to fit them to the backstrap, but it was all of maybe half an hour's work.

As far as a good fit out of the box, I think that the chances of that are about zero. You're going to have to do some sanding because not only are there differences from manufacturer to manufacturer, but within the product line itself there is a pretty significant lack of consistency. But that should not dissuade you. As long as you send a tracing of your existing frame (or grips), you should get a set that is pretty easy to finish up.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae
Hardcase is offline  
Old May 26, 2010, 03:26 PM   #4
kwhi43@kc.rr.com
Senior Member
 
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,169
Just ordered my Ivory from Dixie for 35.00 Will be here tommorrow. Will
give a report then.
kwhi43@kc.rr.com is offline  
Old May 26, 2010, 03:44 PM   #5
ClemBert
Senior Member
 
Join Date: March 2, 2009
Location: Orlando
Posts: 929
I have nothing to add or aid in your quest for faux ivory grips other than to say I like the look on cap-n-ball revolvers. Mine are more of a brighter white rather than a classic ivory color but I like the clean look. They are Ruger and Pietta factory grips, respectively.

Let us know how it turns out and post pics when you get the new grips installed.



ClemBert is offline  
Old May 26, 2010, 04:48 PM   #6
Dino.
Junior member
 
Join Date: November 2, 2006
Posts: 908
Awesome pics ClemBert!
Dino. is offline  
Old May 26, 2010, 05:01 PM   #7
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Thanks folks. Mainly I was checking into service from the 3.
One I spoke with on the phone earlier today. Unfortunately he eliminated himself during the conversation!

That leaves me 2 options, but one doesn't seem to have grips for the model I have (1858 Remington "new army") so it looks like I'm going with "Tombstone" as my choice.

From all the information I can find grip shapes vary enormously, even within a given model & brand, so I was expecting the template issue.

Nothing against western wildlife & wonders I just can't find a grip listed from them for the pistol I have.
wogpotter is offline  
Old May 26, 2010, 05:06 PM   #8
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
The first post sorta complained about the price. I make some items, not grips, from faux or alternate ivory. There is subsitute/faux/alternative ivory and there are several kinds. The one I would classify as the 'good' one is an expensive material. A completed pair of grips from that at $50.00 strikes me as an excellent price. The other materials I would not classify as suitable for grips. BTW, the 'good' stuff is very hard to work with, the time involved is worth something as well.
Rifleman1776 is offline  
Old May 26, 2010, 06:59 PM   #9
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
An Audi is nothing but a more expensive Volkswagen......
PetahW is offline  
Old May 26, 2010, 08:55 PM   #10
suzukibruce
Senior Member
 
Join Date: May 14, 2010
Location: camden maine
Posts: 137
i have been in communication with dave at tombstone most of the week. they don't have the ingredients for the black pearl grips that i want for my remmy but they have a huge selection of other colors and styles. i have had their grips on several of my guns, including a paintball gun that used grips identical to 1911's... he is a great guy and they make a real quality product.
__________________
Guns don't kill people, jealous husbands that come home from work early kill people
suzukibruce is offline  
Old May 27, 2010, 05:54 AM   #11
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
Tombstone makes a nice, affordable grip. They are cast oversize and do require fitting. He sends along a well done set of instructions.

DGW also sells some fine grips, I recently put this set on Baby Dragoon.




These are a set of Tombstone grips for a 1911 that I modded for a Ruger MK.

Last edited by madcratebuilder; May 27, 2010 at 06:04 AM.
madcratebuilder is offline  
Old May 27, 2010, 07:26 AM   #12
ClemBert
Senior Member
 
Join Date: March 2, 2009
Location: Orlando
Posts: 929
Back in January I corresponded with Dave Corbin over at Tombstone about availability of stainless grip screw hardware to include the escutcheon/nut in stainless steel since I own some SS revolvers. Unfortunately, he doesn't offer any of his grips with SS hardware. That's too bad because I really like some of his grips and especially his prices. He did indicate that he'd incorporate SS hardware if I sent him the pieces. Perhaps I'll do that in the future.
ClemBert is offline  
Old May 27, 2010, 09:58 AM   #13
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Quote:
The first post sorta complained about the price.
Sorry if it came off that way. The intention in posting the price was to indicate that I didn't intend to spend a lot more on real hand-carved items for a pistol I only paid a small amount for. This was just to avoid confusion.
Many of the ones I looked at were in the $30~50 range & that was the range I was looking into, even though there are some really fine hand-done ones I just couldn't justify $500 grips on a $300 gun.

Quote:
An Audi is nothing but a more expensive Volkswagen......
So's a Porche if you look at it in the right light

Thanks again fols, I have to try & find '58 Remy grips on DGW. So far I'm not having any luck doing so.
wogpotter is offline  
Old May 28, 2010, 06:48 AM   #14
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
Quote:
Thanks again fols, I have to try & find '58 Remy grips on DGW. So far I'm not having any luck doing so.
http://www.dixiegunworks.com/product...oducts_id=6076
madcratebuilder is offline  
Old May 28, 2010, 08:41 AM   #15
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Thanks.
My search-fu seems weak today
wogpotter is offline  
Old May 31, 2010, 08:52 AM   #16
Dino.
Junior member
 
Join Date: November 2, 2006
Posts: 908
Just got my grips from westernandwildlifewonders.com
They needed quite a bit of shaping, but fortunately I was given enough excess material to work with.



Dino. is offline  
Old May 31, 2010, 01:44 PM   #17
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Update:

I spoke with both the guy at "another vendor" who didn't want my business, and Tombstone grips. I know the "another vendor" didn't want it because he told me so

OK, so he doesn't need my $30.00 I wish him well dealing with prospective new customers in this economy.

Then I had a quick conversation by e-mail with Tombstone! What a difference.
I recieved a detailed, hand written, not automated, reply that was pleasant, informative & encouraging. The writer read my questions, addressed the issuers in detail & responded accurately, informatively & promptly. Guess who got the order?

Now all I have to do is wait for the drawings to get there, the grips to be made & mailed back to me so I can do the final fitting.
wogpotter is offline  
Old June 25, 2010, 02:17 PM   #18
wogpotter
Senior Member
 
Join Date: September 27, 2004
Posts: 2,941
Update here:
The grips arrived a couple of days ago, but there was a fitting problem I could not solve.
I e-mailed the folks at Tombstone who are going to re-do the grips so they will be able to be fitted to the grip frame.

Apart from that issue the grips were solid-feeling, not at all "plasticky", & semi-matte finished. They came with detailed instructions & a tips & tricks information sheet so I can either finish them slick & glossy, or not, as I see fit.

The defective set has been returned to the seller & we are working together to get a really nice finished product. I'll update again when the replacements arrive.
wogpotter is offline  
Old June 25, 2010, 04:17 PM   #19
kwhi43@kc.rr.com
Senior Member
 
Join Date: August 21, 2008
Location: Kansas City
Posts: 1,169
I got these from Dixie. Cost 35.00 About 1/2 hour fitting. They say they
will turn yellow.

kwhi43@kc.rr.com is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10441 seconds with 9 queries