The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 3, 2000, 07:25 PM   #1
45Colt
Member
 
Join Date: December 2, 2000
Posts: 60
I have been loading 200gr HP Rainiers for my .45 over 6.0 grs of W231. (Speer says the top load is 6.2 btw). I recently bought some Starline plus P brass, and would like to load the Rainiers up to about 950-1000 fps. Rainier says the bullet can take 1200fps. Problem is, none of the loading data I have shows what powder charges are for plus P loading. I have checked Speer, Winchester, Hodgdon, and Accurate. Any suggestions for formula, or other data sources? TIA
45Colt
45Colt is offline  
Old December 3, 2000, 08:21 PM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,213
HIGHLY RECOMMEND Alliant Power Pistol for 45ACP +P. Alliant's guide says 8.2g MAX! for 200g. Guide shows 1030fps at 22,000 psi.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05335 seconds with 9 queries